Limiting Port Ranges On The Scopia ® Xt Desktop Server - Avaya Scopia XT Installation Manual

Planning your Avaya Scopia
Port Protocol Destination
Range
443 TCP
(TLS)
Related Links
Planning your Avaya Scopia
Limiting Port Ranges on the Scopia
Limiting Port Ranges on the Scopia
About this task
This section provides instructions of how to limit the following port ranges on the Scopia
Desktop server:
Related Links
Ports to Open on Avaya Scopia
Limiting the UDP Port Range for RTP/RTCP on the Scopia
Limiting the TCP Port Range for H.245/Q.931 on the Scopia
Limiting the UDP Port Range for RTP/RTCP on the Scopia
server
About this task
®
The Scopia XT Desktop server has designated 10000-65535 as the default port range for UDP
(RTP/RTCP). To provide additional security for your firewall, you can limit this range.
To calculate approximately how many ports the Scopia
number of license connections by 14, which amounts to reserving 14 ports per client.
Procedure
1. Log in to the Scopia
2. Select Client > Settings.
®
Avaya Scopia XT Desktop Server Installation Guide
18
® XT Desktop Deployment
Functionality
can configure port 443
instead)
®
Scopia XT Enables sending control
Desktop messages between the
®
Clients and Scopia
®
Scopia server and Clients, and is
Mobile also used to tunnel RTP
media if the UDP ports are
blocked
®
XT Desktop Deployment
®
XT Desktop server
®
XT Desktop
®
XT Desktop server Administrator web user interface.
Comments on this document? infodev@avaya.com
Result of Blocking
Port
Scopia
DesktopClients
XT Desktop cannot connect to
the Scopia
Desktop server
on page 8
on page 18
®
XT Desktop server
on page 14
®
XT Desktop server
®
XT Desktop server
®
XT Desktop server uses, multiply the
Required
You can configure
this port during
installation. For
more information,
see Installation
Guide for Scopia
Desktop server
page 21.
®
XT Mandatory
®
XT
®
on page 18
on page 19
®
XT Desktop
August 2015
®
on
XT