Table of Contents
Advertisement
Recording a CD (continued)
To stop recording
Press x.
To cancel the menu operation
Press MODE SELECT.
Tips
• If you want to record from the reverse side, press
TAPE B n to light its indicator after pressing CD
SYNC.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in low-level
high-frequency signals, do the following procedure
after pressing CD SYNC.
1 Press MODE SELECT repeatedly to select "Set
Up Mode", then press PUSH ENTER.
2 Move the multi stick toward b or B repeatedly
to select "TAPE Set Up ?", then press PUSH
ENTER.
3 Move the multi stick toward b or B repeatedly
to select "DOLBY NR Set Up ?", then press
PUSH ENTER.
4 Move the multi stick toward b or B repeatedly
to select "On", then press PUSH ENTER.
"DOLBY NR" appears in the display.
To return to the original setting, repeat steps 1
through 4 and select "Off" in step 4.
Note
You cannot listen to other sources while recording.
14
Listening to the radio
— Preset Tuning
Preset radio stations in the tuner's memory first
(see "Step 3: Presetting radio stations" on page 8).
?/1
2
(Power)
V
B
b
v
MODE
1
m M
SELECT
VOLUME
Multi stick
PUSH ENTER
TUNER/BAND
. >
m M
VOL +/–
Hide quick links:
Advertisement
Table of Contents
