Sony MHC-ZX10 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Stereo System
  5. MHC-ZX10 - Mini Hifi Component System
  6. Service manual
Sony MHC-ZX10 Service Manual

Sony MHC-ZX10 Service Manual

Hide thumbs Also See for MHC-ZX10:
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
• MHC-ZX10 is composed of following model.
As for the service manual, it is issued for each component
model,then, please refer to them.
COMPONENT MODEL NAME FOR MHC-ZX10
COMPACT DISC DECK
HCD-ZX10
RECEIVER SYSTEM
SPEAKER SYSTEM
SPECIFICATIONS
General
Power requirements
North American model:
120 V AC, 60 Hz
European model:
230 V AC, 50/60 Hz
Power consumption
USA model:
190 watts
Canadian model:
195 watts
European model:
200 watts
Dimensions (w/h/d)
Approx. 250 x 375 x 395 mm
Supplied accessories:
AM loop antenna (1)
FM lead antenna (1)
Remote Commander (1)
Batteries (2)
Speaker cable (2)
Front speaker pads (8)
Design and specifications are subject to change without notice.
9-929-228-11
SS-ZX10
Sony Corporation
Audio Entertainment Group
MHC-ZX10
• Abbreviation
CND
: Canadian model
G
: German model
PARTS LIST
Part No.
Description
ACCESSORIES & PACKING MATERIALS
********************************
1-418-862-11
COMMANDER, STANDARD (RM-SR110)
1-501-374-11
ANTENNA, LOOP
1-501-659-41
ANTENNA (FM)
1-769-306-11
CORD, SPEAKER (1.5m)
4-210-254-11
CUSHION (FOOT) (FRONT SPEAKER)
4-227-887-11
MANUAL, INSTRUCTION (ENGLISH) (US, CND, AEP, UK, CIS)
4-227-887-21
MANUAL, INSTRUCTION (FRENCH) (CND)
4-227-887-31
MANUAL, INSTRUCTION (FRENCH, SPANISH) (AEP)
4-227-887-41
MANUAL, INSTRUCTION (GERMAN) (AEP, G)
4-227-887-51
MANUAL, INSTRUCTION (DUTCH, PORTUGUESE, ITALISH) (AEP)
4-227-887-61
MANUAL, INSTRUCTION (SWEDISH, DANISH, FINNISH) (AED)
4-991-151-41
COVER, BATTERY (FOR RM-SR110)
MINI Hi-Fi COMPONENT SYSTEM
UC Model
Canadian Model
AEP Model
UK Model
Remark
2000D001668-1
Printed in Japan ©2000.4
Published by HA Quality Assurance Dept.

Advertisement

Table of Contents
loading

Related Manuals for Sony MHC-ZX10

Summary of Contents for Sony MHC-ZX10

  • Page 1 SERVICE MANUAL UC Model Canadian Model AEP Model UK Model • MHC-ZX10 is composed of following model. As for the service manual, it is issued for each component model,then, please refer to them. COMPONENT MODEL NAME FOR MHC-ZX10 • Abbreviation...
  • Page 2 40 – 13,000 Hz (±3 dB), (phono jacks) impedance 1 kΩ 10,000 Hz; rates 110 W per channel minimum (DOLBY NR OFF) using Sony TYPE I cassette PHONES: accepts headphones of RMS power, with no more than 10 % total 8 Ω or more 40 –...
  • Page 3 LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

  • Page 4: Table Of Contents

    TABLE OF CONTENTS NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT 1. GENERAL ·········································································· 4 The laser diode in the optical pick-up block may suffer electrostatic 2. DISASSEMBLY break-down because of the potential difference generated by the 2-1. Case ···················································································· 7 charged electrostatic load, etc.

  • Page 5: General

    SECTION 1 GENERAL 3 45 6 7 89 wd wf wg wh ?/1 button and indicator PHONES jack TAPE A h button and indicator FUNCTION button TAPE A H button and indicator DISPLAY button TAPE B h button and indicator TIMER SELECT indicator TAPE B H button and indicator .
  • Page 6 To change the time Step 1: Hooking up the system Step 2: Setting the time Move the multi stick toward v or V (continued) The previous explanation shows you how to set repeatedly to set the hour. the time while the power is off. To change the To attach the front speaker pads time while the power is on, do the following: Move the multi stick toward B.
  • Page 7 Timer Select ? (42, 44) Cannot be selected during CD playback. Mode End Cannot be selected during CD program playback. Display Set Up ? Spectrum Set Up ? (34) Dimmer Set Up ? (34) Mode End Mode End Sony Corporation Printed in Malaysia...

  • Page 8: Disassembly

    SECTION 2 DISASSEMBLY Note : Follow the disassembly procedure in the numerical order given. 1 three screws 2-1. CASE (BVTT 3 × 8) 5 Remove the case in the arrow direction. 4 three screws (case 3 TP2) 2 two screws (BVTT 3 ×...

  • Page 9: Tape Mechanism Deck Section (Tcm-230Awr12)

    2-3. TAPE MECHANISM DECK SECTION (TCM-230AWR12) 2 two screws (BVTP 3 × 8) 1 two screws (BVTP 3 × 8) 3 tape mechanism deck section (TCM-230AWR12) 2-4. BACK PANEL SECTION qs Remove the back panel section 1 connector in the arrow direction. (CN901) 2 connector 0 two screws...

  • Page 10: Main Board, Front Amp Board

    2-5. MAIN BOARD, FRONT AMP BOARD 0 two screws (BVTP 3 × 8) 8 connector (CN801) qs two screws (BVTP 3 × 8) qa heat sink 9 two screws (BVTP 3 × 16) 5 two connectors (CN803, CN804) qd Remove the FRONT AMP board 6 MAIN board in the arrow direction.

  • Page 11: Cd Mechanism Deck Section (Cdm53F-K2Bd38)

    2-7. CD MECHANISM DECK SECTION (CDM53F-K2BD38) 3 chassis, sub 4 four screws (sumitite (B3), +BV) 5 CD mechanism deck section (CDM53F-K2BD38) 2 two screws (BVTT 3 × 6) 1 three screws (BVTT 3 × 6) 2-8. FITTING BASE (GUIDE) ASSY, BRACKET (CHASSIS) AND FITTING BASE (MAGNET) ASSY 7 four screws (BVTP M2.6)

  • Page 12: Tray (Sub)

    2-9. TRAY (SUB) 1 Rotating the pulley (LD), shift the slider (selection) in the arrow A direction. 2 Rotating the pulley (mode) in the arrow direction, adjust the tray (sub) to be removed. 3 Rotating the pulley (LD), shift the slider (selection) in the arrow B direction. 4 Rotating the pulley (mode) in the arrow direction, remove the tray (sub) to be removed.

  • Page 13: Gears Installation

    2-11. GEARS INSTALLATION 3 gear (gear B) portion A Adjust the gear (gear B) with the portion A as shown. 1 Slide the slider (U/D) fully in the arrow direction. 4 gear (gear A) 2 gear (U/D slider) gear slider (U/D) gear linearly (gear B) Adjust so as to be aligned with...

  • Page 14: Stocker Section Installation

    2-13. STOCKER SECTION INSTALLATION 2 portion A of tray (sub) Hook the portion A of tray (sub) 1 stocker section to the slider (selection). potion A sticking of of tray (sub) slider (selection) 3 two step screws 3 two step screws 2-14.

  • Page 15: Test Mode

    SECTION 3 TEST MODE [MC Cold Reset] [Change-over of MW Tuner Step between 9 kHz and • The cold reset clears all data including preset data stored in the 10 kHz] RAM to initial conditions. Execute this mode when returning •...
  • Page 16 [MC Test Mode] • This mode is used to check operations of the respective sections of Amplifier, Tuner, CD and Tape. Procedure: Press the ?/1 button to turn on the set. Press the three buttons of x , DISPLAY and DISC 3 simultaneously.
  • Page 17 [Aging Mode] This mode can be used for operation check of CD section and tape deck section. • If an error occurred: The aging operation stops and display status. • If no error occurs: The aging operation continues repeatedly. 1. Operating method of Aging Mode Turn on the main power and select “CD”...
  • Page 18 2. Correction of Errors [When due to tape deck] Stopped while tape aging operation with the “ ” displayed state. [When due to CD] Press x , DISPLAY , and Z together to display the error code. • Display of number of mechanism errors Move the stick to the left and right to display “CDM Err Count *”.

  • Page 19: Mechanical Adjustments

    SECTION 4 SECTION 5 MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS Precaution DECK SECTION 0 dB=0.775V 1. Clean the following parts with a denatured alcohol-moistened swab: 1. Demagnetize the record/playback head with a head demagnetizer. record/playback heads pinch rollers 2. Do not use a magnetized screwdriver for the adjustments. erase head rubber belts 3.
  • Page 20 Tape Speed Adjustment (Deck A) 3. Mode: Playback test tape Note: Set the test mode using the following method and begin tape P-4-A100 main board CN301 speed adjustment. (10kHz, –10dB) Pin 3 (L-ch) oscilloscope In the test mode, the speed will switch to double speed or normal speed each time the HI-SPEED DUB button is pressed.
  • Page 21 Record Bias Adjustment (Deck B) Record Level Adjustment (Deck B) Procedure: Procedure: INTRODUCTION INTRODUCTION When set to the test mode performed in Tape Speed Adjust- When set to the test mode performed in Tape Speed Adjust- ment, when the tape is rewound after recording, the “REC memory ment, when the tape is rewound after recording, the “REC memory mode”...
  • Page 22 Note: Clear RF signal waveform means that the shape “◊” can be CD SECTION clearly distinguished at the center of the waveform. Note : RF signal waveform 1. CD Block is basically designed to operate without adjustment. Therefore, check each item in order given. VOLT/DIV : 200mV 2.
  • Page 23 Adjustment Location: [BD BOARD] (Conductor Side) (XPCK) (AGCCON) IC103 (TEO) IC101 (FEO) (FEI) (VC) (RF) (DGND)

  • Page 24: Diagrams

    HCD-ZX10 SECTION 6 DIAGRAMS 6-1. CIRCUIT BOARDS LOCATION THIS NOTE IS COMMON FOR PRINTED WIRING • Indication of transistor BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) TRANS board These are omitted. For schematic diagrams.

  • Page 25: Block Diagrams

    HCD-ZX10 6-2. BLOCK DIAGRAMS – BD SECTION – IC781 OPTICAL PICK-UP BLOCK CD DIGITAL (KSM-213DAP/Z-NP) IC101 OPTICAL DIGITAL SERVO DETECTOR IC103 DIGITAL SIGNAL PRCESSOR RF AMP D OUT DIGITAL DOUT ERROR CORRECTOR RF AC RF EQ SUMMING OVER SAMPLING DEMODULATOR SERIAL IN DIGITAL INTERFACE...
  • Page 26 HCD-ZX10 – SYSCON/SERVO SECTION – IC401 (2/2) IC701 MASTER CONTROL SYSTEM CONTROL IC703 FL DRIVER SENS SENS CD-DATA XC-IN X IN GRID EXT CLK DATA X401 X701 FL701 GRID EXT RESET RESET 32.768MHz 12.5MHz CD-CLK XC-OUT X OUT SCOR SCOR SUBQ SQ-DATA-IN IC702...
  • Page 27 HCD-ZX10 – MAIN SECTION – IC101 J101 J101 SOUND PROCESSOR (2/2) • RCH is omitted (1/2) VIDEO • SHIGNAL PATH (AUDIO) REC B2 IN E2 J102 : CD IC801 SW OUT WOOFER IN D2 Q130 POWER AMP TM801 RY881 : VIDEO MUTE L OUT IN C2...
  • Page 28 HCD-ZX10 • WAVEFORMS – BD BOARD – – MAIN BOARD – IC401 qa IC101 yj IC101 ra CD PLAY MODE CD PLAY MODE STOP MODE approx 200mVp-p 6.4Vp-p 3.0Vp-p 16.9344MHz 32.768kHz IC401 qd IC101 ta IC101 el STOP MODE CD PLAY MODE CD PLAY MODE approx 170mVp-p 2.9Vp-p...

  • Page 29: Printed Wiring Board - Bd Section

    HCD-ZX10 6-3. PRINTED WIRING BOARD – BD SECTION – • See page 23 for Circuit Boards Location.

  • Page 30: Schematic Diagram - Bd Section

    HCD-ZX10 6-4. SCHEMATIC DIAGRAM – BD SECTION – • See page 27 for Waveforms. • See page 47 for IC Block Diagrams. (KSM-213DAP) (Page 35) The components identified by Les composants identifiés par mark 0 or dotted line with mark une marque 0 sont critiques 0 are critical for safety.

  • Page 31: Printed Wiring Board - Deck Section

    HCD-ZX10 6-5. PRINTED WIRING BOARD – DECK SECTION – • See page 23 for Circuit Boards Location. JW15...

  • Page 32: Schematic Diagram - Deck Section

    HCD-ZX10 6-6. SCHEMATIC DIAGRAM – DECK SECTION – (Page 33) The components identified by Les composants identifiés par mark 0 or dotted line with mark une marque 0 sont critiques 0 are critical for safety. pour la sécurité. Replace only with part number Ne les remplacer que par une specified.

  • Page 33: Printed Wiring Board - Main Section

    HCD-ZX10 6-7. PRINTED WIRING BOARD – MAIN SECTION – • See page 23 for Circuit Boards Location. • Semiconductor Location Ref. No. Location D101 D102 C-10 D181 D182 D183 G-10 D501 D502 D503 D504 D505 D506 D507 D508 D509 D510 D511 D512 D912...

  • Page 34: Schematic Diagram - Main (1/3) Section

    HCD-ZX10 6-8. SCHEMATIC DIAGRAM – MAIN (1/3) SECTION –...

  • Page 35: Schematic Diagram - Main (2/3) Section

    HCD-ZX10 6-9. SCHEMATIC DIAGRAM – MAIN (2/3) SECTION – • See page 27 for Waveforms. • See page 50 for IC Pin Functions. • See page 32 for Printed Wiring Board. FUNCTION...

  • Page 36: Schematic Diagram - Main (3/3) Section

    HCD-ZX10 6-10. SCHEMATIC DIAGRAM – MAIN (3/3) SECTION – • See page 48 for IC Block Diagrams. • See page 32 for Printed Wiring Board.

  • Page 37: Printed Wiring Board - Amp Section

    HCD-ZX10 6-11. PRINTED WIRING BOARD – AMP SECTION – • See page 23 for Circuit Boards Location. • Semiconductor Location Ref. No. Location D801 D802 D821 D831 D851 D871 D881 D911 D963 D981 D982 D983 D984 D991 D992 D993 D994 D995 D996 D997...

  • Page 38: Schematic Diagram - Amp Section

    HCD-ZX10 6-12. SCHEMATIC DIAGRAM – AMP SECTION – The components identified by Les composants identifiés par mark 0 or dotted line with mark une marque 0 sont critiques 0 are critical for safety. pour la sécurité. Replace only with part number Ne les remplacer que par une specified.

  • Page 39: Printed Wiring Board - Panel Section

    HCD-ZX10 6-13. PRINTED WIRING BOARD – PANEL SECTION – • See page 23 for Circuit Boards Location. • Semiconductor Location Ref. No. Location D601 D602 D603 D604 D691 D755 D756 D761 D762 D763 IC701 IC702 IC703 IC704 Q601 Q602 Q603 Q663 Q664 Q665...

  • Page 40: Schematic Diagram - Panel Section

    HCD-ZX10 6-14. SCHEMATIC DIAGRAM – PANEL SECTION – • See page 27 for Waveforms. • See page 49 for IC Block Diagrams. • See page 53 for IC Pin Functions. FUNCTION...

  • Page 41: Printed Wiring Board - Switch Section

    HCD-ZX10 6-15. PRINTED WIRING BOARD – SWITCH SECTION – • See page 23 for Circuit Boards Location. • Semiconductor Location (SUB PANEL Board) Ref. No. Location D605 D606 D607 D608 D609 D610 D611 D612 D613 D652 Q605 Q607 Q609 Q611 Q613 Q652 •...

  • Page 42: Schematic Diagram - Switch Section

    HCD-ZX10 6-16. SCHEMATIC DIAGRAM – SWITCH SECTION –...

  • Page 43: Printed Wiring Board - Cd Mechanism Section

    HCD-ZX10 6-17. PRINTED WIRING BOARD – CD MECHANISM SECTION – • See page 23 for Circuit Boards Location. (Page 32) (Page 32)

  • Page 44: Schematic Diagram - Cd Mechanism Section

    HCD-ZX10 6-18. SCHEMATIC DIAGRAM – CD MECHANISM SECTION – (Page 34) (Page 34)

  • Page 45: Printed Wiring Board - Power Supply Section

    HCD-ZX10 6-19. PRINTED WIRING BOARD – POWER SUPPLY SECTION – • See page 23 for Circuit Boards Location.

  • Page 46: Schematic Diagram - Power Supply Section

    HCD-ZX10 6-20. SCHEMATIC DIAGRAM – POWER SUPPLY SECTION – The components identified by Les composants identifiés par mark 0 or dotted line with mark une marque 0 sont critiques 0 are critical for safety. pour la sécurité. Replace only with part number Ne les remplacer que par une specified.

  • Page 47: Printed Wiring Board - Leaf Sw Section

    HCD-ZX10 6-21. PRINTED WIRING BOARD – LEAF SW SECTION – • See page 23 for Circuit Boards Location. CAPSTAN MOTOR A DECK B DECK PLUNGER PLUNGER (Page 32) 6-22. SCHEMATIC DIAGRAM – LEAF SW SECTION –...

  • Page 48: Ic Block Diagrams

    6-23. IC BLOCK DIAGRAMS IC101 CXD2587Q (BD BOARD) ERROR DIGITAL ASYMMETRY DIGITAL CORRECTOR CORRECTION LRCK OPERATIONAL AMPLIFIER PCMD INTERFACE DEMODULATOR ANALOG SWITCH CONVERTER EMPH XVDD CLOCK XTSL GENERATOR XTAI TIMING TES1 LOGIC XTAO TEST XVSS SERVO DSP PWM GENERATOR AVDD1 FRDR FOCUS FOCUS PWM...
  • Page 49 IC103 CXA2568M-T6 (BD BOARD) IC704 BA3830F (PANEL BOARD) APC PD AMP REFFERENCE RESET 18 RESET LC/PD CURRENT LD_ON HOLD REFFERENCE 17 f01 CURRENT AGCVTH VREF APC LD AMP HOLD_SW LINE 16 f02 AGCCONT (50%/30% OFF) LINE RF_BOT 15 f03 RFTC RF SUMMING AMP RF_EQ_AMP RF_1...
  • Page 50 IC703 M35501P (PANEL BOARD) DIG3 DIG0 DIG1 DIG2 DIG4 DIG5 DIG6 DIG8 DIG9 DIG10 DIG7 SHIFT REGISTER OPTIONAL DIGIT COUNTER POWER ON RESET RESET OVFIN OVFOUT DIG15 DIG14 DIG13 DIG12 DIG11...

  • Page 51: Ic Pin Descriptions

    6-24. IC PIN DESCRIPTIONS • IC401 M30620MCA-A35FP MASTER CONTROL (MAIN BOARD) Pin No. Pin Name Descriptions CD-DATA IN CD data output. CD-CLK CD clock output. CD latch signal output. AC-CUT AC cut input. L= ON,H=OFF — Not used. SQ-DATA Subcode Q data input. SQ-CLK Subcode Q data input.
  • Page 52 Pin No. Pin Name Descriptions 502-DATA Data output to sound processor 502-CLK Clock output to sound processor ST-CLK TUNER clock signal output. ST-DIN TUNER data input. ST-DOUT TUNER data output. ST-CE TUNER chip eneble output. TUNED TUNED detect signal input. L=ON, H=OFF STEREO STEREO detect signal input.
  • Page 53 Pin No. Pin Name Descriptions A SHUT A deck reel pulse detect signal output. B SHUT B deck reel pulse detect signal output. B HALF/REC A/REC B B deck half detect signal input./A deck or B deck record detect signal input. MODEL-IN MODEL input.
  • Page 54 • IC701 TMP88CS77AF-1A84 SYSTEM CONTROL (PANEL BOARD) Pin No. Pin Name Descriptions LED SEL LED select signal output 2 to 12 LED0 to LED10 LED driver output STANDBY LED STANDBY LED driver output TIMER LED TIMER SEL LED driver output 15, 16 VOLUME A, B Rotary encoder pulse input...

  • Page 55: Exploded Views

    SECTION 7 EXPLODED VIEWS NOTE: • -XX, -X mean standardized parts, so they may • Hardware (# mark) list and accessories and The components identified by mark 0 or have some differences from the original one. packing materials are given in the last of this dotted line with mark 0 are critical for safety.

  • Page 56: Front Panel Section

    7-2. FRONT PANEL SECTION not supplied FL701 TCM-230AWR12 not supplied 57 59 not supplied not supplied not supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks X-4952-705-1 PANEL ASSY, FRONT(US,CND) 1-769-938-11 WIRE(FLAT TYPE) (11 CORE) X-4952-706-1 PANEL ASSY, FRONT(EXCEPT US,CND) 4-227-544-01 SPRING, TENSION 4-226-715-01 KNOB, VOLUEME 4-226-755-01 COVER, LOCK...

  • Page 57: Chassis Section

    7-3. CHASSIS SECTION not supplied CDM53F-K2BD38 not supplied not supplied The components identified by Les composants identifiés par mark 0 or dotted line with mark une marque 0 sont critiques 0 are critical for safety. pour la sécurité. Replace only with part number Ne les remplacer que par une specified.

  • Page 58: Cd Mechanism Deck Section-1 (Cdm53F-K2Bd38)

    7-4. CD MECHANISM DECK SECTION-1 (CDM53F-K2BD38) not supplied not supplied M702 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 4-218-253-11 SCREW (M2.6), +BTTP 3-341-549-01 SCREW (2.6X12) (DIA.7.5),+PTP WH 1-671-508-11 LOAD MOTOR BOARD 4-211-235-01 BELT (COMMUNICATION) 4-211-215-01 GEAR (EJECT) 4-211-236-01 BELT (LOADING) 1-671-502-11 INT/COUNT SW BOARD 4-211-231-01 PULLEY (MODE)

  • Page 59: Cd Mechanism Deck Section-2 (Cdm53F-K2Bd38)

    7-5. CD MECHANISM DECK SECTION-2 (CDM53F-K2BD38) not supplied not supplied S707 M701 not supplied BU-K1BD33 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 4-985-672-01 SCREW (+PTPWH M2.6), FLOATING 4-211-245-01 SPRING, COMPRESSION 4-220-933-01 INSULATOR 1-671-507-11 CLAMP MOTOR BOARD 4-211-212-51 TRAY (SUB) 4-211-221-01 GEAR (LD MOVABLE) X-4950-322-3 HOLDER (BU) ASSY...

  • Page 60: Base Unit Section (Bu-K2Bd38A)

    7-6. BASE UNIT SECTION (BU-K2BD38) The components identified by Les composants identifiés par mark 0 or dotted line with mark une marque 0 sont critiques 0 are critical for safety. pour la sécurité. Replace only with part number Ne les remplacer que par une specified.

  • Page 61: Tape Mechanism Deck Section (Tcm-230Awr12)

    7-7. TAPE MECHANISM DECK SECTION (TCM-230AWR12) Note: Two different types of tape mechanism are used depending on models. They maintain compatibility as an entire mechanism even though there are some different parts are used. not supplied Ref. No. Part No. Description Remarks Ref.

  • Page 62: Electrical Parts List

    SECTION 8 AUDIO ELECTRICAL PARTS LIST NOTE: Ref. No. • Due to standardization, replacements in the Part No. Description • COILS Remarks Ref. No. Part No. Description Remarks When indicating parts by reference number, parts list may be different from the parts uH: µH please include the board name.
  • Page 63 AUDIO Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R624 1-249-432-11 CARBON 1/4W C182 1-163-123-00 CERAMIC CHIP 180PF R625 1-249-429-11 CARBON 1/4W < CONNECTOR > < VARIABLE RESISTOR > CN101 1-784-741-11 CONNECTOR, FFC 19P RV301 1-238-598-11 RES, ADJ, CARBON 2.2K CN102 1-793-907-11 CONNECTOR, FFC/FPC 16P RV311...
  • Page 64 CD SW CLAMP MOTOR CONNECTOR FRONT AMP Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < SWITCH > < IC > S101 1-771-853-11 SWITCH, DETECTION(LIMIT IN SW) IC701 8-759-633-65 IC M54641L < VIBRATOR > < RESISTOR > X101 1-579-280-11 VIBRATOR, CRYSTAL(16.9344MHz) R701...
  • Page 65 FRONT AMP Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C857 1-136-495-11 MYLAR 0.068uF 5.00% 50V < TERMINAL > C858 1-136-165-00 MYLAR 0.1uF 5.00% 50V (EXCEPT US,CND) * EPT951 1-537-738-21 TERMINAL, EARTH C859 1-136-165-00 MYLAR 0.1uF 5.00% 50V (EXCEPT US,CND) <...
  • Page 66 FRONT AMP IN SW INT/COUNT LEAF SW Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R827 1-249-433-11 CARBON 1/4W < RELAY > R828 1-249-417-11 CARBON 1/4W F R829 1-249-437-11 CARBON 1/4W RY881 1-755-168-11 RELAY R830 1-249-417-11 CARBON 1/4W F R841 1-249-441-11 CARBON...
  • Page 67 LEAF SW LOAD MOTOR MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < DIODE > A-4428-653-A MAIN BOARD, COMPLETE (US,CND) ********************* D1001 8-719-911-19 DIODE 1SS133T-72 D1002 8-719-911-19 DIODE 1SS133T-72 A-4428-668-A MAIN BOARD, COMPLETE (EXCEPT US,CND) ********************* <...
  • Page 68 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C172 1-136-165-00 MYLAR 0.1uF 5.00% 50V C416 1-126-916-11 ELECT 1000uF 20.00% 6.3V C173 1-136-165-00 MYLAR 0.1uF 5.00% 50V C462 1-104-665-11 ELECT 100uF 20.00% 10V C174 1-126-960-11 ELECT 20.00% 50V C464 1-163-031-11 CERAMIC CHIP...
  • Page 69 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks D502 8-719-988-61 DIODE 1SS355TE-17 JR25 1-216-296-91 SHORT D503 8-719-988-61 DIODE 1SS355TE-17 JR26 1-216-295-91 SHORT D504 8-719-988-61 DIODE 1SS355TE-17 JR27 1-216-295-91 SHORT D505 8-719-988-61 DIODE 1SS355TE-17 JR29 1-216-296-91 SHORT D506 8-719-988-61 DIODE 1SS355TE-17 JR30...
  • Page 70 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks Q901 8-729-040-20 TRANSISTOR RT1P137L-TP R196 1-216-097-91 RES-CHIP 100K 1/10W Q902 8-729-027-31 TRANSISTOR DTA124EKA-T146 R291 1-216-049-91 RES-CHIP 1/10W Q903 8-729-040-19 TRANSISTOR RT1N137L-TP R292 1-216-049-91 RES-CHIP 1/10W Q904 8-729-901-00 TRANSISTOR DTC124EKA-T146 R301 1-216-085-00 METAL CHIP 1/10W...
  • Page 71 MAIN OUT SW PANEL Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R413 1-216-295-91 SHORT R493 1-216-085-00 METAL CHIP 1/10W R416 1-216-073-00 METAL CHIP 1/10W (EXCEPT US,CND) R417 1-216-073-00 METAL CHIP 1/10W R493 1-216-073-00 METAL CHIP 1/10W R418 1-216-025-91 RES-CHIP...
  • Page 72 PANEL Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < CAPACITOR > < FERRITE BEAD > C691 1-162-286-31 CERAMIC 220PF FB701 1-412-473-21 INDUCTOR 0UH C692 1-162-286-31 CERAMIC 220PF FB702 1-412-473-21 INDUCTOR 0UH C701 1-162-306-11 CERAMIC 0.01uF 30.00% 16V C702 1-124-589-11 ELECT...
  • Page 73 PANEL SENSOR SENSOR 2 SUB PANEL Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R707 1-249-429-11 CARBON 1/4W < SWITCH > R708 1-249-429-11 CARBON 1/4W R709 1-249-429-11 CARBON 1/4W S601 1-762-875-21 SWITCH, KEYBOARD(@/1) R710 1-249-429-11 CARBON 1/4W S602 1-762-875-21 SWITCH, KEYBOARD(DISPLAY)
  • Page 74 SUB PANEL SUB TRANS TRANS Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks Q609 8-729-900-80 TRANSISTOR BA1A4M-TP S652 1-762-875-21 SWITCH, KEYBOARD(.) Q611 8-729-900-80 TRANSISTOR BA1A4M-TP S701 1-772-502-11 CONTROLLER, JOY STICK(ENTER) Q613 8-729-900-80 TRANSISTOR BA1A4M-TP S751 1-473-392-11 ENCODER, ROTARY(VOLUME) Q652 8-729-900-80 TRANSISTOR BA1A4M-TP **************************************************************...
  • Page 75 0 are critical for safety. pour la sécurité. Replace only with part number Ne les remplacer que par une specified. pièce portant le numéro spécifié. Sony Corporation 9-929-243-11 2000D0968-1 Audio Entertainment Group Printed in Japan ©2000.4 Published by HA Quality Assurance Dept.
  • Page 76 Canadian Model SS-ZX10/ZX30AV/ZX70DVD AEP Model UK Model SS-ZX10/ZX30AV/ZX50MD/ZX70DVD E Model SS-VZ50MD/ZX50MD Australian Model SS-ZX30AV/ZX50MD This set is the speaker system in MHC-ZX10/ZX30AV/ZX70DVD, Tourist Model DHC-VZ50MD/ZX50MD. Photo: SS-ZX10 SS-VZ50MD SPECIFICATIONS Speaker system 3-way, bass-reflex type, magnetically shielded type Speaker units Woofer:...
  • Page 77 4-874-614-01 SCREW (4) (3.5X14), TAPPING ACCESSORIES & PACKING MATERIALS 4-227-663-01 PACKING ******************************** A-4412-154-A CABINET ASSY, SPEAKER 4-229-552-01 PACKING (TW) 1-558-848-11 CORD, SPEAKER 1-529-663-11 SPEAKER (4cm) Sony Corporation 9-929-242-11 2000D091685-1 Audio Entertainment Group Printed in Japan © 2000. 04 Published by HA Quality Assurance Dept.

Table of Contents