Sony MHC-V42D Service Manual

2019/03/05 00:47:46 (GMT+09:00)
SERVICE MANUAL
Ver. 1.0 2019.02
Note:
Be sure to keep your PC used for service and
checking of this unit always updated with the
latest version of your anti-virus software.
In case a virus affected unit was found during
service, contact your Service Headquarters.
Speaker section
Speaker system:
3-way, Double Bass Reflex
Speaker unit:
Tweeter L/R: 40 mm, cone type
Midrange L/R: 80 mm, cone type
Woofer: 250 mm, cone type
Inputs
AUDIO/PARTY CHAIN IN (TV) L/R:
Voltage 2 V, impedance 47 kilohms
TV (ARC):
Supported audio signal:
2-channel Linear PCM
MIC1:
Sensitivity 1 mV, impedance 10 kilohms
MIC2/GUITAR:
Sensitivity 1 mV, impedance
10 kilohms (When guitar mode is
turned off.)
Sensitivity 200 mV, impedance
1 Megaohm (When guitar mode is
turned on.)
Outputs
AUDIO/PARTY CHAIN OUT L/R:
Voltage 2 V, impedance 1 kilohm
HDMI OUT (TV) ARC:
Supported audio signal:
2-channel Linear PCM (up to 48 kHz),
Dolby Digital
HDMI section
Connector:
Type A (19 pin)
Disc player section
System:
Compact disc and digital audio and
video system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6 μW
* This output is the value measure-
ment at a distance of 200 mm from
the objective lens surface on the
Optical Pick-up Block with 7 mm
aperture.
Frequency response:
20 Hz – 20 kHz
9-930-602-01
2019B81-1
©
2019.02
Video color system format:
Latin American models:
NTSC
Other models:
NTSC and PAL
USB section
Supported USB device:
Mass Storage Class
Maximum current:
1 A
(USB) port:
Type A
FM tuner section (except AEP, UK)
FM stereo, FM superheterodyne tuner
Antenna:
FM lead antenna
Tuning range:
87.5 MHz – 108.0 MHz (50 kHz step)
BLUETOOTH section
Communication system:
BLUETOOTH Standard version 4.2
Output:
BLUETOOTH Standard Power
Class 2
Maximum output power:
< 9.5 dBm
Maximum number of devices to be
registered:
8 devices
Maximum number of simultaneous
connection (Multipoint):
3 devices
Maximum communication range:
Line of sight approx. 10 m
Frequency band:
2.4 GHz band (2.4000 GHz –
2.4835 GHz)
Modulation method:
FHSS (Freq Hopping Spread
Spectrum)
Compatible BLUETOOTH profiles
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio Video Remote
Control Profile)
SPP (Serial Port Profile)
Sony Corporation
Published by Sony EMCS (Malaysia) PG Tec
MHC-V42D
Model Name Using Similar Mechanism
DVD Mechanism Type
Optical Pick-up Name
SPECIFICATIONS
Supported codecs:
SBC (Subband Codec)
AAC (Advanced Audio Coding)
LDAC
The actual range will vary depending on
1)
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
antenna's performance, operating system,
software application, etc.
2) BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH communica-
tion between devices.
NFC section
Frequency band:
13.56 MHz
Supported audio formats
Supported bit rate and sampling frequencies:
MP3:
32/44.1/48 kHz, 32 kbps –
320 kbps (VBR)
AAC:
44.1 kHz, 48 kbps – 320 kbps
(CBR/VBR)
WMA:
44.1 kHz, 48 kbps – 192 kbps
(CBR/VBR)
WAV:
44.1/48 kHz (16 bit)
Supported video formats
Xvid:
Video codec: Xvid video
Bit rate: 4.854 Mbps (MAX)
1)
Resolution/Frame rate:
720 × 480, 30 fps
720 × 576, 25 fps (except for Latin
American models)
Audio codec: MP3
2) :
AEP Model
UK Model
E Model
Australian Model
MHC-V41D
CDM90-DVBU204//C
CMS-S76RFS7GP
MPEG4:
File format: MP4 File Format
Video codec: MPEG4 Simple
Profile (AVC is not compatible.)
Bit rate: 4 Mbps
Resolution/Frame rate:
720 × 480, 30 fps
720 × 576, 25 fps (except for Latin
American models)
Audio codec: AAC-LC (HE-AAC is
not compatible.)
DRM: Not compatible
General
Power requirements:
AC 120 V – 240 V, 50/60 Hz
Power consumption:
115 W
Power consumption (at the Power Saving
mode):
0.5 W (When "BT STBY" is set to
"OFF" and [CONTROL FOR
HDMI] is set to [OFF].)
2 W* (When "BT STBY" is set to
"ON" and [CONTROL FOR HDMI]
is set to [ON].)
Dimensions (W/H/D) (Approx.):
328 mm × 799 mm × 300 mm
Mass (Approx.):
12.6 kg
Operating temperature:
5 °C to 35 °C
* The power consumption of the system will
be less than 0.5 W when there is no HDMI
connection and "BT STBY" is set to "OFF".
Design and specifications are subject to
change without notice.
– Continued on next page –
HOME AUDIO SYSTEM
SYS SET