IBM 8408-44E Site And Hardware Planning page 112

Use the following tables to determine the appropriate power cord to use with your system in your
country.
Table 126 lists power cords to use from the server to the power mains. These power cords are not used
with IBM supplied PDUs.
Table 127 on page 101 lists power cords that connect IBM servers to a PDU.
Table 126. Supported power cords for POWER8 systems
Feature codes (FC) Description
6460 Type 4 NEMA
5-15 plug
6469 Type 5 NEMA
6-15 plug
6470 Type 4 NEMA
5-15 plug
Type 70
6471
INMETRO NBR
6147
6472 Type 18 CEE (7)
VII
96
Site and hardware planning
1
Voltage, IBM shipped
amperage, and plug
length
120 - 127 V ac, 12 Plug type 4
A, 4.3 m (14 ft)
200 - 240 V ac, 12 Plug type 5
A (15 A derated),
4.3 m (14 ft)
100 - 127 V ac, 12 Plug type 4
A, 1.8 m (6 ft)
100 - 127 V ac, 15 Plug type 70
A, 2.7 m (9 ft)
200 - 240 V ac, 10 Plug type 18
A, 2.7 m (9 ft)
Matched female IBM part number
wall receptacle
(on wall)
Receptacle type 4 39M5513
Receptacle type 5 39M5096
Receptacle type 4 39M5080
Receptacle type 39M5233
70
Receptacle type 39M5123
18