Honeywell CORE Drive Quick Start Manual page 16

HONEYWELL CORE DRIVE
RIGHT and LEFT arrows to move the cursor with a numeric parameter, or to enter into and out
of menus.
UP and DOWN arrows used to change numeric parameter values, or cycle through menu
options.
Function Keys - will have different functions at different times as displayed on the screen. Used
during Wizard Mode.
F1 F2
F3
F4
Pressing the HAND key will take the VFD into Hand control, where the user can control the
motor Frequency and START and STOP.
HAND
Pressing this key will revert the VFD to remote/Automatic control from a remote speed and start
command source.
AUTO
LED
Steady ON: operation indicator for the VFD, including DC brake, zero speed, standby, restart
after fault and speed search.
Blinking: VFD is decelerating to stop.
RUN
Steady OFF: VFD is not running.
Steady ON: VFD is stopped.
Blinking: VFD is in the standby status.
STOP
RESET Steady OFF: VFD running.
Operation Direction LED (green: forward running, red: reverse running).
Blinking: drive is changing the operation direction.
FWD
REV
HAND LED: When HAND LED is on (HAND mode); when HAND LED is off (AUTO mode).
HAND
AUTO LED: When AUTO LED is on (AUTO mode); when AUTO LED is off (HAND mode).
AUTO
62-0410—04
Table 9. Descriptions of Keypad Functions
Table 10. Descriptions of LED Functions
16
Descriptions