Keypad Basics - Honeywell CORE Drive Quick Start Manual

KEYPAD BASICS

Key
This is the RUN/START command to the VFD when in Hand/Keypad control only.
RUN It can operate the AC motor drive by the function setting and the RUN LED will be ON.
Stop Command Key. This key has the highest processing priority in any situation. Drive will
always STOP when this button is pressed.
STOP
The RESET key can be used to reset the drive after the fault occurs. For those faults that can't
RESET
be reset by the RESET key, see the fault records after pressing MENU key for details.
This key controls the operational direction of the motor. NOT activated out of the box.
FWD
REV
Press ENTER and go to the next submenu. If at the parameter level, press enter to modify and
press enter to save changes
ENTER
ESC key function is to leave current menu and return to the last menu. It is also functioned as a
return key in the sub-menu.
ESC
Press menu to return to main menu. See main menu descriptions on following pages.
MENU
CORE
F1 F2
COMM
ERR
ESC
ENTER
HAND
FWD FWD
RUN
REV
Table 9. Descriptions of Keypad Functions
15
F3 F4
RUN
MENU
AUTO
STOP
RESET
M31501
Descriptions
HONEYWELL CORE DRIVE
62-0410—04