Installation; Safety Precautions - Talyn Plus 2 Installation & Operation Manual

4.1.2 Remove the upper cover of the package carton
and check and confirm the wheel balancer, spare parts
and documents you purchased according to the
packing list. If you have any question, please contact
with the dealer.
Package materials such as plastic, PBV, nail, screw,
timber and carton must be placed into a scrap bin to
treat according to the local regulation.

4.2 INSTALLATION

Remove the connect bolt. And carry down the wheel
balancer to place it on the flat and solid floor. We
should store it indoor to avoid it from being exposed to
Fig 4
the sunlight for long time and the moisture.
5. SAFETY AND PREVENTION
5.1.1 Before operation, please confirm that you have
read the entire warning label and the instruction manual.
Not according with the safety instruction can cause the
injuries to the operators & bystanders.
5.1.2 Keep your hands and the other parts of your body
from the location with the potential danger. Before
starting the machine, you must check it there existing
the damaged part. If any break or damage, the machine
will not be used.
5.1.3In emergency situation, if the tire not fixed, you
should press "STOP" to stop the rotation of the wheels.
Adopts high strength protective cover to prevent the tire
from flying in any direction and can only fall on the
ground to protect the safety of the operators.
5.1.4 Before balancing, operators should check all the
tires and wheels to find the possible faults. Do not
balance the tires and wheels with fault.
5.1.5 Do not exceed the load capability of the wheel
balancer and do not attempt to balance the wheel
bigger than the designed dimension.
5.1.6 Wear suitable clothing such as suitable safety suit
such as glove, glasses and working suit. Not wear
necktie, long hair, loose clothing. The operators should
stand beside the machine when operation the machine.
Keep from the unauthorized personnel.
5.1.7 Before balancing,
installation of the wheel suitable. Before rotation, be
sure the nut turn 4 turns around the thread shaft and
firmly locked on the main shaft.
GENERAL CONDITIONS OF USE
6
you must confirm the