Table of Contents
Advertisement
1. PREFACE
WARNING
There will be one year of warranty period on the
condition that the machine including the operation
system, tools and accessories are used properly and/or
without damage. During this period, the manufacturer
will repair or replace the parts returned or the machine
itself,
sustaining
the
responsibility for normal wear and tear, incorrect use or
transportation, or failure to carry out maintenance. The
manufacturer will not inform the customer about any
improvements to the products or the upgrading of the
production line.
INTRODUCTION
The purpose of this manual is to provide the owner and
operator of this machine with a set of safe and practical
instructions for the use and maintenance of the wheel
balancer.
If such instructions are carefully followed, the machine
will offer you the levels of efficiency and duration.
The following paragraphs define the levels of danger
regarding the machine.
DANGER: Refers to immediate danger with the risk of
serious injury or death.
WARNING: Dangers or unsafe procedures that can
cause serious injury or death.
costs
but
not
accepting
ATTENTION: Dangers or unsafe procedures that can
cause minor injuries or damage to property.
Read these instructions carefully before using the
machine. Keep this manual and the illustrated materials
supplied with the equipment in a folder near the place
of operation so as to allow the machine operators to
consult the documentation at any time.
The manual is only to be considered valid for the
machine serial number and model stated on the
attached nameplate.
The instructions and information described in this
manual must always be complied with: the operator will
be held responsible for any operation not specially
described and authorized in this manual.
Some of the illustrations contained in this booklet have
been taken from pictures of prototypes: standard
production machines may differ slightly in certain
respects. These instructions are for the attention of
personnel with basic mechanical skills. We have there-
fore condensed the descriptions of each operation by
omitting detailed instructions regarding, for example,
how to loosen or tighten the fixing devices. Do not
attempt to perform operations unless properly qualified
or with suitable experience. If necessary, please
contact an authorized Service Centre for assistance.
INSTALLATION
Take the utmost care when unpacking, assembling,
lifting and setting up the machine as indicated below.
1
Hide quick links:
Advertisement
Table of Contents
