Table of Contents
Advertisement
Factory Self-Calibration
If the customer self-calibration will not be helping to
maintain the machine to have satisfactory balancing
stability, we recommend that you proceed Factory
Self-Calibration procedure. Below you would find the
detailed instruction:
Press "Home button" one time
P
"DIS + button" one time
"[
]", press
SET
you will see "[
]-[
Press "Home button" two times
POS—XXX
[
], pull the wheel by hand( clock-wise or
anti-clock-wise) slowly.
When it displays
，then continue to pull the wheel slowly
one time
POS
until it displays [
time
.
The screen displays [
start rotation of the machine.
When machine stops rotation, it displays[
at this moment, please pull the wheel until the outer
indicating lights are all illuminating, clamp 100g
calibration standard weight on the outside rim at 12
o'clock position. Press
machine.
23
：
,and it displays
UP
]"
, and it dispalys
POS
110
[
]—[
] press 'Fine button"
120
]—[
] Press " Fine button" one
ADD
0
]-[
], press
ADD
to start rotation of the
, and
to
100
]—[
] ,
Hide quick links:
Advertisement
Table of Contents
