Parameter Setup - Talyn Plus 2 Installation & Operation Manual

indication lamps light. Pls add the weight
corresponding to the value displayed in the
window. Once again, start the machine to test.
The window will display the unbalance value. The
balance process will be completed until reaching
the balance range you requied.
9.2 MACHINE PARAMETER SETUP
Press to enter program setup menu.
1.1 -p-(hood setup) press
entrance select
the function of the hood. Press
confirm.
1.2 –SP-(hood control function setup)，In the
upper condition, press
display as the left figure.
Press to confirm the entrance.
Select to setup the on/off of the hood
function. Press
confirmation.
to confirm the
to setup the on/off of
to
. The display will
to confirm after
1.3 APP(minimum unbalance setup), In the
upper state, press
Press to enter the setup
Select the corresponding unit，Press
confirm the entrance, Select
unbalance unit is 1Gr or 5Gr. Press
confirm.
BIP (beeper setup) Press
on/off of the deeper.
Press to confirm the entrance.Select
to setup the on/off of the beeper. Press
to confirm.
to enter the sub-level
Press
19
to enter the APP setup.
key to
to select the
key to
to setup the