Philips EM5A NTSC Service Manual page 114

www.freeservicemanuals.info
EN 114 8. EM5A NTSC
8.3.10 Options
Select this sub menu to set the initialization codes (options) of
the set via text menus.
Table 8-5 Option overview
Menu-item Subjects
Dual screen PIP / Dual Screen
Picture Tube CRT Type
CRT size
Picture Rotation
Anti Moire filter
Video repro Featurebox type
Lightsensor
2D Combfilter
3D Combfilter
Picture improvement
Auto Scavem
Signalling bits
Source Select AV3 2Fh
AV4 2Fh
Audio Repro Dolby
Rear speakers
Subwoofer present
Acoustic system
Virtual Dolby
AVL
Miscellaneous Tuner type
Opt. no. Group 1
Group 2
Store Options
8.3.11 Option numbers
Select this sub menu to set all options at once (expressed in
two long strings of numbers.)
An option number (or 'option byte') represents a number of
different options. When you change these numbers directly,
you can set all options very quickly. All options are controlled
via eight option numbers.
When the EAROM is replaced, all options will require resetting.
To be certain that the factory settings are reproduced exactly,
you must set both option number lines. You can find the correct
option numbers on the CRT sticker inside the TV set.
Example: The CRT sticker in the 30PW9818/17 gives the
following option numbers:
1. 08276 00070 00796 00008
Electrical Alignments
Options Physically in the set
Yes Feature present. Cannot be changed
4:3 4:3 picture tube.
16:9 16:9 picture tube.
28" / 32" / 36" 16:9 CRT size in inches (for USA sizes differ.)4:3 CRT size in inches.
29" / 34" / 38"
Yes Frame rotation circuitry present (diagram A5.)
No Frame rotation circuitry not present.
Yes Feature present.
No Feature not present.
Eagle Eagle IC present (PixelPlus.)
1050i/1250i
Yes Feature present.
No Feature not present.
Yes Feature present.
No Feature not present.
Yes Feature present.
No Feature not present.
Yes LTP (TOPIC) present.
No LTP (TOPIC) not present.
Yes Feature present.
No Feature not present.
No Cannot be changed.
Yes Cannot be changed.
Yes Cannot be changed.
Not applicable Cannot be changed.
Virtual Virtual Dolby (no rear speakers.) Cannot be changed
Yes Feature present.
No Feature not present.
FL11 'Soft' design (with 'flying saucer' on top of rear cover.)
FL12 'Edgy' design with full range speakers (no centre sp.)
PV02 'Edgy' design for 4:3 sets.
Yes Feature present.
No Feature not present.
Yes Automatic Volume Limiter in user menu.
No Automatic Volume Limiter not in user menu..
Philips Set with Philips tuner.
Alps Set with Alps tuner.
Group 1 option code overview.
Group 2 option code overview.
Select and press 'OK' to store options.
2. 00016 00000 00000 00326
The first line (group 1) indicates options 1 to 4, the second line
(group 2) options 5 to 8 (see tables below.)
Every 5-digit number represents 16 bits (so the maximum
number will be 65536 if all options are set.)
When all the correct options are set, the sum of the decimal
values of each Option Byte (OB) will give the option number.