Communications Settings - Valeport VA500 Operating Manual

5.4. Communications Settings

# code Followed By:
#059 ;baud_rate<CR>
RS485 is enabled by grounding a pin in the communications lead -
see Wiring Information
#001 ;ALTIMETER_address<CR>
#002 <CR>
#005 ;ON<CR> or ;OFF<CR>
#006 <CR>
Analogue Settings:
#094 ;analogue_range<CR>
<CR>
#095
#096 ;counts<CR>
;Analogue range limit<CR>
#097
<CR>
#098
Page 15
Configuration and Operation
Operation
Sets the units baud rate
2400,4800,9600,19200,38400, 57600,115200
Sets the 485 address
Returns the address
Turns ON or OFF address mode
Returns ON or OFF for address mode
Sets the analogue output voltage range
0 – 0 – 5V
1 – 0 – 10V
Reads analogue output voltage range set
above
Analogue output test.
Sets the range equivalent to full scale DAC
output
Reads the range equivalent to full scale DAC
output
© 2019 Valeport Ltd