To Stop Recording - Sony CMT-MD1DX Operating Instructions Manual

Recording a CD on an MD
(continued)
2
Press CD 6 to open the disc door
and place a CD on the disc tray.
3
Press CD 6 to close the disc door.
4
Press CD-MD SYNC.
The MD stands by for recording and the
CD pauses at the beginning.
CD
SYNC
C D
5
Press MD ^.
Recording starts. When the recording is
completed the CD stops and the MD
pauses automatically. Press MD p, the
MD stops.

To stop recording

Press MD p.
Before inserting an MD
When the power is on, make sure the MD
indicator is off. If the MD indicator lights up
blue, another MD is already inserted. Press
MD 6 and remove the MD.
Tip
The MD is labeled with the disc title of the CD
automatically (see page 25) when using a new
recordable MD or an MD whose tracks have been
completely erased (see page 41) (Disc Memo Copy
function).
16
With the
label side up
MD
LEVEL SYNC -
TRACK
- 7 2 m 3 1
While "TOC" is lit or is flashing
To ensure complete recording, do not move
the system or disconnect the power cord. The
system updates the Table of Contents (TOC)
while "TOC" is flashing.
If the MD ends during recording
The CD and the MD stop automatically.
Notes
• The MD recording is complete only after all the
recording information is entered to TOC at which
point TOC stops flashing and goes out. Be careful
not to disconnect the power cord or move the
system before this point. Before disconnecting the
power cord, do the following:
– Remove the MD.
– Press 1/u to turn off the system.
• If the MD is record protected, "MD Protected"
appears in the display and the MD cannot be
recorded on. Press MD 6 and remove the MD,
slide the record protection tab to the closed
position (see page 30), reinsert the MD and try
again.
• Please do not use MDs with labels that are
protruding or labels that have not been positioned
correctly. Use of such MDs may damage this
DBFB
system.
s