The Md Deck - Playback; Playing The Md Tracks Repeatedly - Sony CMT-MD1DX Operating Instructions Manual

Labeling a CD (continued)
7
Repeat steps 4 through 6 to
complete the entire title.
If you enter an incorrect character, press
CURSOR ? or / until the character
you want to change flashes, then repeat
steps 4 through 6.
To erase a character, press
CANCEL/NO while the character is
flashing. You cannot insert characters
between previously inserted characters.
8
Press ENTER/YES to complete the
labeling procedure.
The title is memorized into the system
and then the original display appears.
To cancel labeling
Press EDIT.
Note
Turn on the system power at least once a month,
otherwise the titles are erased from the memory.
To check the titles
Press DISPLAY while playback is stopped.
Each time you press the button, the display
changes as follows:
The disc title
The total number of tracks and the total
playing time
To erase a disc title
1 Press EDIT, then press +/– repeatedly until
"Name Erase ?" appears.
2 Press ENTER/YES.
The disc title flashes.
"No Name" appears if no disc title is
stored.
3 Press +/– repeatedly until the disc title you
want to erase appears.
4 Press ENTER/YES again.
"Complete" appears and the disc title is
erased.
To cancel erasing
Press CANCEL/NO.
26
The MD Deck – Playback
Playing the MD
tracks repeatedly
— Repeat Play
You can repeat a single track or all the tracks
on a disc.
– +
( P p
= +
( P p
= +
– +
Press REPEAT during play until
"REPEAT" or "REPEAT 1" appears.
MD
TRACK
M D 1
REPEAT: For all the tracks on the current
MD.
REPEAT 1*: For a single track only.
* You cannot repeat a single track during Shuffle
Play and Program Play.
To cancel Repeat Play
Press REPEAT until "REPEAT" or "REPEAT
1" disappears.
1 / u
REPEAT
+
–
LEVEL SYNC -
REPEAT DBFB
1 m 3 5 s