To Stop Recording - Sony DHC-MD555 Operating Instructions Manual

2
Insert a recordable MD to MD 1.
Open the MD cover, slide the disc into
the MD 1 slot, and then close the cover.
Inserting an MD
With the arrow
pointing toward
the deck
With the label
side up
The front edge of
the slot should be
even with the
edge of the MD.
3
Press FUNCTION repeatedly to
switch the function to CD.
Recording
4
Press SELECT SYNC.
"SELECT" appears, and the CD 1 – 5
buttons flash.
5
Press CD 1.
The CD 1 button lights green.
6
Press MD 1.
The MD 1 button lights green.
p
7
Press ENTER/YES.
The MD deck stands by for recording
and the CD player is in pause for play.
Press ·P for the MD (or MD P on
8
the remote).
Recording starts.
The CD player and the MD deck both
stop when the recording is completed.
To cancel recording
Press SELECT SYNC during steps 5 to 7.

To stop recording

Press p for the MD.
Tips
• The procedure described here explains how to
record from CD 1 onto MD 1. To record from any
other CD onto any other MD, see "Recording your
favorite tracks" on page 37.
• If the MD is partially recorded, recording starts
after the recorded tracks. To erase the recorded
contents, see "Erasing recordings" on page 53.
• The CD/MD buttons for empty disc trays/slots do
not flash.
• You can adjust the recording level to the desired
volume after performing step 7 (see page 48).
• If you record on an unrecorded or completely
erased (see page 54) MD, the disc title assigned to
the CD (see page 31) is copied as it is to the MD
(Disc Memo Copy). Depending on the disc, CD
text information may also be copied. If "TEXT"
flashes during recording, press NAME EDIT/
CHARACTER, and then press ENTER/YES to
record the title of the current track. (If "TEXT" is
lit, it is automatically copied.)
continued
17