Using The Cd Display - Sony CMT-MD1DX Operating Instructions Manual

Programming the CD tracks
(continued)
To check the total number of
programmed tracks
Press DISPLAY in stop mode. "Step" appears,
followed by the total number of programmed
tracks. The number of the last programmed
track appears, followed by the total playing
time of the program.
CD
C D 1 1
The number of the last
programmed track
To check the programmed track
number
Press CD + or = repeatedly during the
Program Play.
Additional tasks
To
Cancel Program
Play
Add a track to
the program
Erase the entire
program
Tip
The program you made remains after Program Play
finishes. To play the same program again, press
CD (.
Note
When the total playing time of the programmed
tracks exceeds 100 minutes, "- - m - - s" appears in
the display.
24
LEVEL SYNC -
DBFB
PGM
2 8 m 0 s 8
The total playing
time of the
programmed tracks
Do this
Press CD p, then press PLAY
MODE repeatedly until
"PGM" and "SHUFFLE"
disappear.
Do steps 3 and 4 with the
Program Play stopped.
Press CD p with the Program
Play stopped.
Using the CD
display
You can check the remaining time of the
current track or that of the CD.
( P
= +
( P
= +
–
Press DISPLAY repeatedly during play.
Each time you press the button, the display
changes as follows:
n Elapsed time of the current track
The remaining time of the current track
The remaining time of the current CD*
* The remaining time of the program is displayed
during Program Play.
To check the total playing time
and number of tracks on the CD
The total playing time and number of the
tracks are displayed during normal or shuffle
play in stop mode.
CD
C D 1 7
The total number
of the tracks
p
+
p
DISPLAY
–
+
LEVEL SYNC -
DBFB
7 2 m 3 1 s
The total playing
time