Caple DD940BK Instruction Manual page 39

E L E C T R I C A L C O N N E C T I O N
» The electrical connection must be carried out by a qualified electrician who is authorised to
carry out such work.
» Statutory regulations and the connection specifications issued by the local power supply
company must be strictly observed.
» When connecting the appliance it must be ensured that there is a device which makes it
possible to disconnect it from the mains at all poles with a contact opening width of at
least 3mm. Line-protecting switches, fuses or contactors are suitable cut-out devices. When
connecting and repairing the appliance, disconnect it from the electricity supply with one of
these devices.
» The earth wire must be sufficiently long so that if the strain relief fails, the live wires of the
connecting cable are subjected to tension before the earth wire.
» Any unnecessary cable must be removed from the installation area beneath
the appliance.
» Make sure that the local mains voltage is the same as the voltage on the
rating label.
» Full protection against accidental contact must be ensured on installation.
AT T E N T I O N :
Incorrect connection may result in the power electronics unit being destroyed.
Power supply -Mains voltage: 380-415V 3N~, 50/60Hz
Component rated voltage: 220-240V
Fuse rating: 32amp
Please keep this instruction manual for future reference
Instruction manual DD940BK 39