Advertisement
Quick Links
Advertisement
Related Manuals for Politec ALES Series
Summary of Contents for Politec ALES Series
- Page 1 Product code...
- Page 2 ALES 60 | 120 POLITEC | INSTALLATION MANUAL VERSION 2.0...
- Page 3 The sensor is designed to detect intrusion and activate the alarm; it is not a device that prevents an intrusion. Politec is not responsible for damage, injury or loss caused by accidents, theft, force majeure (including a momentary lightning-induced surge), abuse, improper or incorrect use, faulty installation or improper maintenance.
- Page 4 Responsibility of the manufacturer: Politec declines all responsibility for failures resulting from incorrect installation; lack of maintenance, incorrect assembly or use. • Politec is also not responsible for incorrect or incomplete operation of the product or failure to detect intrusion. •...
- Page 5 COMPONENTS IR Cover Terminal board Trimmer Channel selector Tamper Horizontal adjustment screw Vertical adjustment screw High intensity alignment LED (RX) Alignment buzzer (RX) U-shaped bracket for pole mounting Fixing plate ALES 60 | 120 POLITEC | INSTALLATION MANUAL VERSION 2.0...
- Page 6 • Check that the environment chosen for installation is compatible with the total dimensions of the product. • Check that the surface chosen for the installation of the product is solid to guarantee a stable and adequately protected against possible impacts or atmospheric agents. ALES 60 | 120 POLITEC | INSTALLATION MANUAL VERSION 2.0...
- Page 7 CAUTION: In case of drilling of the aluminum profile or of any component the product warranty lapses ALES 60 | 120 POLITEC | INSTALLATION MANUAL VERSION 2.0...
- Page 8 In case of repairs covered by warranty (2 years) but with obvious signs of incorrect installation, Politec s.r.l. reserves the right to decide on any repair costs.
- Page 9 An active infrared barrier can contain several transmitting and receiving stages inside specific columns. The infrared barriers have multiple controls that significantly limit false alarms, but if one or more beams are interrupted, the alarm is triggered. ALES 60 | 120 POLITEC | INSTALLATION MANUAL VERSION 2.0...
- Page 10 DO NOT place the barriers close to roads: the lights on the headlights on the RX may cause noise DO NOT place automatic close to gate barriers: photocell signals can create interference. ALES 60 | 120 POLITEC | INSTALLATION MANUAL VERSION 2.0...
- Page 11 ALIM. SCHEDE TIPICA 12Vcc N.B. THE METAL BODY OF THE LAR22 SUPPLY IS NOT IMPERMEABLE AND CAN NOT BE PLACED OUTSIDE THE ROOMS WITHOUT BEING INSERTED INSIDE A SEALED CONTAINER ALES 60 | 120 POLITEC | INSTALLATION MANUAL VERSION 2.0...
-
Page 12: Terminal Board
Channel 4 Fog environment output (only on RX board) Test sma (only on RX board) 3 TRIMMER Adjustment of the intervention time 4 TMP Spring-loaded TAMPER for anti-removal of the cover ALES 60 | 120 POLITEC | INSTALLATION MANUAL VERSION 2.0... - Page 13 It is sufficient to apply the filter only on the TX, it is not necessary to repeat the operation also on the RX. ALES 60 | 120 POLITEC | INSTALLATION MANUAL VERSION 2.0...
- Page 14 LEDs and by the non-continuous buzzer whistle. • The maximum alignment condition will be reached when the high intensity leds will be lit steady and the buzzer will emit a continuous sound. ALES 60 | 120 POLITEC | INSTALLATION MANUAL VERSION 2.0...
- Page 15 ALES 60 | 120 POLITEC | INSTALLATION MANUAL VERSION 2.0...
- Page 16 Test the TX1 and RX1 optics and proceed with the calibration as explained. REPEAT the calibration on RX2, RX3 and RX4. Repeat the operation for each TX optic on each RX. Make sure that TX1 is still aligned with RX1. ALES 60 | 120 POLITEC | INSTALLATION MANUAL VERSION 2.0...
- Page 17 10/15Vcc - Vca = 6W, 0.4 A each. 20/30Vcc - Vca = 6W, 0.2 A each. Tamper output NC contact Operating temperature -25° (con risc.) +65° IP protection IP65 Pole / wall mounting accessories 2 YEARS WARRANTY ALES 60 | 120 POLITEC | INSTALLATION MANUAL VERSION 2.0...
- Page 18 TX and RX to double the attenuation of the beam; • For large distances, the use of an additional external thermostat is recommended, ensuring sufficient power supply, ALES 60 | 120 POLITEC | INSTALLATION MANUAL VERSION 2.0...
- Page 19 Warning! - Local regulations may provide for heavy penalties for the illegal disposal of these products. ALES 60 | 120 POLITEC | INSTALLATION MANUAL VERSION 2.0...
- Page 20 Via Adda, 66/68 20882 Bellusco (MB) Italy T +39 039.6883019 F +39 039.6200471 info@politecsrl.it www.politecsrl.it...
Need help?
Do you have a question about the ALES Series and is the answer not in the manual?
Questions and answers