Oki OkiFax 1050 Service Manual page 58

Figure 2.5.3 Toner Cartridge Installation (3)
• Ensure that the plastic tab on the right-hand side of the toner cartridge recess lines up with the groove on
the toner cartridge. • Press down on both ends to make sure the cartridge is fully seated.
Figure 2.5.4 Toner Cartridge Installation (4)
• Push the blue tab forward until it stops.
Figure 2.5.5 Toner Cartridge Installation (5)
• Clean the toner scattered in the vicinity of the toner cartridge using a cloth moistened with cold water. Do
not use hot water since it makes the toner stick.
• Close the copy stacker so that both latches are locked completely.