Oki OkiFax 1050 Service Manual page 109

06 Closed network
07 TX mode default
08 Telephone/fax automatic switchover
time
09 Buzzer volume
10 1'st cassette paper size
The fax compares the last four digits of
TSI/CSI received from remote station
with fax numbers registered locally for
one-touch dial and two-digits autodial. If
unmatched, the communication will be
automati-cally disconnected.
OFF/RX only/TX and RX selectable.
* Prevention of direct mail or wrong
number calls.
(Reference)
TSI: Transmitting subscriber
identification CSI: Called subscriber
identification
Selects automatically the mode set up
when a 07 TX mode default docu-ment
is loaded on the feeder.
The following combinations are
selectable.
Specifies the time for which the fax
alerts an operator on reception of a call
in the telephone/fax automatic swichover
mode.
20 sec./35 sec. selectable
Refer toTEL/FAX and TAD receive
mode options
Selects the sound volume of each of the
key touchtone, end of communication
buzzer, voice request buzzer and
off-hook alarm from high, low and middle
levels.
Selects A4, LETTER or LEGAL for this
function.
The operator must select the preferable
paper size as the machine cannot detect
the paper size automati-cally.
OFF
STD/
NORMAL and
Non-Photo
35 sec.
MID.
LETTER