Connecting To Other Companies' Pcs - Omron NT631 Series Reference Manual

Communications with the Host

1-4-5 Connecting to other Companies' PCs

Compatible PCs
28
Downloaded from Elcodis.com electronic components distributor
Example of Window Control Area Application
When data is written to the window control area, the PT operates as shown be-
low.
PT
Window
(screen No.34)
Opens
Bottom left coordinate
(20, 139)
When the window display status changes, the change is notified to the window
control area as shown below (Window's Opening/Closing status is notified to the
PT status notify area as well).
PT
Window
Move
(screen No.34)
Bottom left coordinate
(180, 219)
Installing a system program for multi-venders by using a specific system installer
enables the NT31/NT31C or NT631/NT631C to be connected to the PCs of oth-
er companies in direct connection. This system installer is supplied with the Sup-
port Tool (NT-ZJCAT1-EV4).
The NT31/NT31C and NT631/NT631C can be connected to the following Mitsu-
bishi PCs.
• Mitsubishi A series programmable controller (computer link module)
• Mitsubishi FX series programmable controller
For details on the procedure for connecting to other model PCs, refer to the PC
Connection Manual .
Section
PC
WIndow control area
(local window 2)
0034
Screen number
0020
X coordinate
0139
Y coordinate
PC
PT status notify area WIndow control area
(local window 2)
0034
Screen No.
0180
X coordinate
0219
Y coordinate
1-4