Special Functions; Display History Record Function - Omron NT631 Series Reference Manual

Special Functions

2-16 Special Functions

2-16-1 Display History Record Function

Procedure for Using the
Display History Record
Function
Downloaded from Elcodis.com electronic components distributor
Apart from the elements, the PT has the following functions which can be
executed at the PT itself.
• Display history function
• Alarm history function
• Resume function
• Screen saver function
• Buzzer function
• Clock function
• Print function
• Adjusting contrast and brightness during PT operation
• Programming Console function (expansion function)
• Device Monitor function
• Mathematical function
These special functions are described here, except for the Device Monitor and
mathematical functions which are described in the following sections.
The display history record function serves to record the order of display and dis-
play frequency of screens during operation. The recorded data can be displayed
and checked either from the System Menu or during operation.
The procedure for using the display history record function is as follows.
1, 2, 3... 1. [Setting the screen attribute]
When creating screens with the Support Tool, set the History attribute for
screens whose display history is to be recorded. For this setting, a character
string (title) can be registered to indicate the contents of the screen. Title is
up to 24 characters in length.
Only screens for which the History attribute is set are objects of the display
history record function.
2. [Initializing the display history]
Before recording can be started, the display history must be initialized from
the System Menu of the PT to clear the past records.
3. [Recording the display history]
Operate the PT as usual.
When a screen for which the History attribute is set is displayed during op-
eration, the time of display and number of times it has been displayed are
recorded.
4. [Checking the display history record]
Display and check the recorded display history record.
There are two methods for doing this: displaying the record from the System
Menu, and displaying a screen with the display history record function dur-
ing operation.
In either case, the records can be presented in occurrence order (order of
display) or frequency order (order of frequency of display).
Section 2-16
Page 235
Page 237
Page 240
Page 240
Page 241
Page 242
Page 243
Page 246
Page 248
Page 250
Page 269
235