Omron NT631 Series Reference Manual page 165

Programmable terminals
Hide thumbs Also See for NT631 Series:
Table of Contents

Advertisement

Graphs
156
Downloaded from
Elcodis.com
electronic components distributor
Properties
General (properties of the frame)
Position
Coordinates of the top left corner of the graph area.
Size
Width and height of the area in which the broken line graph is
displayed (dot units)
NT31/NT31C:
NT631/NT631C: Width 2 to 640; Height 2 to 480
Frame
Whether or not a frame is displayed for the graph area
Check mark (frame displayed)/
No check mark (frame not displayed)
Display Sign
Whether or not a negative area is displayed.
Check mark (displayed)/No check mark (not displayed)
Direction
Direction in which numeral memory table contents are
displayed in the broken line graph (smaller number → larger
numbers) (Direction of broken line graphs, page 158)
Up/Down/Left/Right
Color
Frame
Display color of the frame (Colors other than black and white are
available with the NT31C and NT631C only.)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
+ Range
Display color of the positive range (Colors other than black and
white are available with the NT31C and NT631C only.)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
– Range
Display color of the negative range (Colors other than black
and white are available with the NT31C and NT631C only.)
(effective only when a check mark is set for Display Sign)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
Section
Width 2 to 320; Height 2 to 240
2-10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nt31 seriesNt21 seriesNt31c seriesNt631c series

Table of Contents