Chapter 1 - Product Overview; Overview; Product Build Options; Package Contents - Multitech Conduit AP User Manual

Chapter 1 – Product Overview

Overview

Conduit AP (MTCAP) connects thousands of IoT assets to the cloud using the LoRaWAN
network coverage to difficult to reach areas and is capable of packet forwarding user data between LoRa end
points and a centrally located network server on the cloud, in a data center, or a public network.
Note: Check for an updated version of this document at
conduit-ap/.

Product Build Options

Product
MTCAP-L4E1-868-001L
MTCAP-868-001L
MTCAP-L4E1-868-001A
MTCAP-868-001A
Note: The complete product code may end in .Rx, where R is revision and x is the revision number. For
example, MTCAP-L4E1-868-001L-R1.

Package Contents

Your device ships with the following:
1 – MTCAP
1 – 5 Volt, 2.5 Amp power supply
1 – RJ45 Ethernet cable
1 – Quick Start
Important: Contact MultiTech Systems if a replacement power supply is needed. Using a different power
supply may damage the device and voids the warranty.

Documentation Overview

The following documents are available at http://www.multitech.com/brands/multiconnect-conduit-ap. Select your
model to find the documents specific for that device.
Document
Conduit AP MTCAP User Guide for Europe
Conduit AP MTCAP for mLinux Quick Start
®
Conduit AP MTCAP-L4E1 User Guide for Europe
https://www.multitech.com/brands/multiconnect-
Description
Conduit AP with LTE and LoRa 868 MHz using mLinux
Conduit AP with LoRa 868 MHz using mLinux
Conduit AP with LTE and LoRa 868 MHz using AEP
Conduit AP with LoRa 868 MHz using AEP
Description
This document. Hardware, regulatory, and getting started
information.
Steps for getting started with mLinux models. Ships with
the device and is available online.
PRODUCT OVERVIEW
®
protocol. It expands LoRa
5