Using The Sleep Timer - Sony STR-DG920 Operating Instructions Manual

Name Function
Y Playback
The letters (L, C, R, etc.)
channel indicate the channels being
indicators played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
L Front Left
R
Front Right
C Center (monaural)
SL Surround Left
SR
Surround Right
S Surround (monaural or the
surround components obtained
by Pro Logic processing)
SBL Surround Back Left
SBR Surround Back Right
SB
Surround Back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: When Speaker
Pattern is set to "3/0.1"
(page 91)
Sound Field: A.F.D. AUTO

Using the Sleep Timer

You can set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
Each time you press the button, the display
changes cyclically as follows:
0:30:00 t 1:00:00 t 1:30:00 t 2:00:00
t OFF
When Sleep Timer is activated, "SLEEP"
lights up in the display.
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the Sleep
Timer will be canceled.
87 US