Sony STR-DG920 Operating Instructions Manual page 57

Multi channel av receiver
Hide thumbs Also See for STR-DG920:
Table of Contents

Advertisement

4
Press V/v repeatedly to select
"Manual Setup", then press
or b.
5
Press V/v/B/b to select speaker
you want to adjust.
6
Press
.
7
Press B/b repeatedly to select
the parameter you want.
8
Press V/v repeatedly to adjust
the setting.
Manual Setup menu parameters
x Level
(Level of speaker)
You can adjust each speaker's level (center,
surround left/right, surround back left/right,
subwoofer). You can adjust the level from
–20.0 dB to +10.0 dB in 0.5 dB steps.
For the front left/right speakers, you can adjust
the balance on either side. You can adjust the
front left level from FL–10.0 dB to FL+10.0
dB in 0.5 dB steps. You can also adjust the
front right level from FR–10.0 dB to FR+10.0
dB in 0.5 dB steps.
x Distance
(Distance from the listening
position to each speaker)
You can adjust the distance from the listening
position to each speaker (front left/right,
center, surround left/right, surround back left/
right, subwoofer).
You can adjust the distance from 3 feet 3
inches to 32 feet 9 inches (1.0 meter to 10.0
meters) in 1 inch (0.01 meter) steps.
x Size
(Size of each speaker)
You can adjust each speaker's (front left/right,
center, surround left/right, surround back left/
right) size.
• LARGE
If you connect large speakers that will
effectively reproduce bass frequencies,
select "LARGE". Normally, select
"LARGE".
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
bass frequencies of each channel from the
subwoofer or other "LARGE" speakers.
continued
57
US

Advertisement

Table of Contents
loading

Table of Contents