Sony STR-DG920 Operating Instructions Manual page 10

Name Function
A AV ?/1
Press to turn on or off the
(on/standby)
audio/video components that
the remote is programmed to
operate.
To turn the TV on or off, press
TV (D) and then press AV
?/1.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (E).
B ?/1
Press to turn the receiver on or
(on/standby) set it to the standby mode.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
Saving the power in
standby mode.
When "Control for HDMI" is
set to "OFF" (page 75).
C AMP
Press to enable the receiver
operation (page 89).
D TV
Press to light up the button. It
changes the remote key
function to activate the buttons
with yellow printing. It also
activate the DISPLAY (U),
OPTIONS TOOLS (K),
HOME/MENU (L),
RETURN/EXIT O (T),
buttons to perform menu
operations for Sony TVs only.
E Input buttons Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control
Sony components (page 45).
You can program the remote to
control non-Sony components
following the steps in
"Programming the remote" on
page 99.
10
US
(J), and V/v/B/b (J)
Name Function
Numeric Press SHIFT (X), then press
buttons
numeric buttons to
(number 5*) – preset/tune to preset stations.
– select track numbers of the
CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape
deck. Press 0/10 to select
track number 10.
– select channel numbers of
the VCR, satellite tuner, Blu-
ray disc player, PSX, DVD/
VHS COMBO, or DVD/
HDD COMBO.
Press TV (D) and then press
the numeric buttons to select
the TV channels.
ENT/MEM Press SHIFT (X), then press
ENT/MEM to
– enter the value after selecting
a channel, disc or track using
the numeric buttons of the
VCR, CD player, DVD
player, LD player, MD deck,
DAT deck, tape deck,
satellite tuner, Blu-ray disc
player, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO.
– store a station during tuner
operation.
To enter the value of Sony TV,
press TV (D) and then press
ENT/MEM.
CLEAR
Press SHIFT (X), then press
CLEAR to
– clear a mistake when you
press the incorrect numeric
button of the DVD player,
Blu-ray disc player, PSX,
satellite tuner, DVD/VHS
COMBO, or DVD/HDD
COMBO.
– return to continuous
playback, etc. of the satellite
tuner or DVD player.