Amplifier Operations; Settings For The Audio (Audio Settings Menu); Language Selection - Sony STR-DG920 Operating Instructions Manual

Amplifier Operations

Settings for the audio
(Audio settings menu)
You can use the Audio settings menu to make
settings for the audio to suit your preference.
Select "Audio" in the Settings menu. For
details on adjusting the parameters, see
"7: Operating the receiver using the GUI
(Graphical User Interface)" (page 36).
Audio settings menu parameters
x A/V Sync (Synchronizes audio
with video output)
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display. You can adjust from 0 ms to 300 ms
in 10 ms steps.
Notes
• This parameter is useful when you use a large LCD
or plasma monitor or a projector.
• This parameter is not valid when
– multi channel input is selected.
– "Analog Direct" is being used.
x Dual Mono (Digital broadcast

language selection)

Lets you select the language you want to listen
to during digital broadcast. This feature only
functions for Dolby Digital sources.
• Main/Sub
Sound of the main language will be output
through the front left speaker and sound of
the sub language will be output through the
front right speaker simultaneously.
• Main
Sound of the main language will be output.
• Sub
Sound of the sub language will be output.
48
US
x Decode Priority (Digital audio
input decoding priority)
Lets you specify the input mode for the digital
signal input to the HDMI IN jacks.
• PCM
When signals from the HDMI IN jack are
selected, only PCM signals are output from
the connected component. To prevent
interruption when playback starts, set to
"PCM". When signals other than PCM
signals are received, set this item to
"AUTO".
• AUTO
Automatically switches the input mode
between DTS, Dolby Digital, or PCM.