Installing the Shelves
DD4200, DD4500, and DD7200 cabling
Data Domain ES30 Expansion Shelf and FS15 SSD Shelf Hardware Guide
44
Figure 14 Recommended cabling for DD2500 integrated with Avamar
There are a few rules that must be followed when adding a mixture of ES20, ES30
SATA, and ES30 SAS shelves to your system. If a system does not follow ALL of these
rules it is not a legitimate configuration.
Prerequisites:
Follow the minimum and maximum shelf capacity configuration provided in the
l
table.
You cannot have ES20 and ES30 shelves in the same set.
l
You cannot have ES30 SATA and ES30 SAS shelves in the same set.
l
You cannot exceed the maximum amount of raw capacity displayed in the
l
product's cabling table.
Need help?
Do you have a question about the Data Domain FS15 SSD Shelf and is the answer not in the manual?
Questions and answers