Introduction - ESAB Origo Feed 304 M12 Series Service Manual

INTRODUCTION

INTRODUCTION
The wire feeders are renamed:
New name
Origo™ Feed 304, M12
Origo™ Feed 484, M12
Origo™ Feed 304, M13
Origo™ Feed 484, M13
The wire feed units with control panel M12
are intended for MIG/MAG-welding together
with stepped welding power sources.
0740 800 144
Old name
ESABFeed 30-4, M12
ESABFeed 48-4, M12
ESABFeed 30-4, M13
ESABFeed 48-4, M13
The wire feed units with control panel M13
are intended for MIG/MAG-welding together
with infinitely adjustable welding power
sources.
- 4 - © ESAB AB 2018