DESCRIPTION OF OPERATION
The first version of the control board, 0486 205 886:
To enable the processor IC1, to select the correct software for the ESABFeed 30-4,
connection L01 must be linked to L02 and L03 to L04. For the ESABFeed 48-4 there is a link
only between L03 and L04.
Selection of motor type, circuit board 0486 205 886
13AP1:14 Gas purge
The circuit board has an input for gas purge, this is not used.
13AP1:15 Inching
The circuit board has an input for inching, this is not used.
13AP1:16 Remote control input
0740 800 144
- 30 -
© ESAB AB 2018