Samson 3430 Operating Instructions Manual page 3

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
8
8.1 Checking the air supply . . . . . . . . . . . . . . . . . . . . . . . . 27
9 Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
9.1 Changing the controller function . . . . . . . . . . . . . . . . . . . . 28
9.2 Exchanging the transmitter module . . . . . . . . . . . . . . . . . . . 30
9.3 Checking the controller function . . . . . . . . . . . . . . . . . . . . 30
Use in hazardous areas . . . . . . . . . . . . . . . . . . . . . . . . 31
10
10.1 Servicing explosion-protected devices . . . . . . . . . . . . . . . . . 31
11 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
General safety instructions
4
The device may only be assembled, started up or operated by trained and
experienced personnel familiar with the product.
According to these mounting and operating instructions, trained personnel is
referred to as individuals who are able to judge the work they are assigned
to and recognize possible dangers due to their specialized training, their
knowledge and experience as well as their knowledge of the relevant
standards.
4
Explosion-protected versions may only be operated by personnel who have
undergone special training or instructions or who are authorized to work on
explosion-protected devices in hazardous areas.
4
Any hazards that could be caused by the signal pressure are to be
prevented by means of the appropriate measures.
4
Proper shipping and appropriate storage of the device are assumed.
Contents
3
EB 7030 EN