BE57-646 ECLIPSE Guided Wave Radar Transmitter - F
1.2
Device Description (DD)
An important requirement of Fieldbus devices is the
concept of interoperability, defined as "the ability to operate
multiple devices in the same system, regardless of manufac-
turer, without loss of functionality."
Device Description (DD) technology is used to achieve this
interoperability. The DD provides extended descriptions
for each object and provides pertinent information needed
by the host system. DDs are similar to the drivers that your
personal computer (PC) uses to operate peripheral devices
connected to it. Any Fieldbus host system can operate with
a device if it has the proper DD and Common File Format
(CFF) for that device.
The most recent DD and CFF files can be found on the
F
fieldbus
OUNDATION
NOTE: Consult your host system vendor for any host-specific files that
may be needed.
1.2.1 F
fieldbus
OUndatIOn
F
fieldbus
™
OUndatIOn
Version
Dev V2 DD V1
1.3
Link Active Scheduler (LAS)
The default operating class of the Eclipse Model 706FF
with F
OUNDATION
capable of being configured as a Link Active Scheduler
(LAS).
The LAS controls all communication on a F
fieldbus
segment. It maintains the "Live List" of all devices
™
on a segment and coordinates both the cyclic and acyclic
timing.
The primary LAS is usually maintained in the host system,
but in the event of a failure, all associated control can be
transferred to a backup LAS in a field device such as the
Eclipse
Model 706 FF.
®
NOTES:
1) The Eclipse Model 706 is normally shipped from the factory with
Device Class set to Basic.
2) The operating class can be changed from Basic to LAS using a
F
fieldbus
OUNDATION
fieldbus
™
OUNDATION
™
web site at fieldcommgroup.org.
dd Revision table
™
F
fieldbus
Compatible with Model
™
OUndatIOn
Release date
April 2017
fieldbus
™
is a Basic device. However, it is
™
configuration tool.
706 Software
Version 1.1a or later
OUNDATION
5