Reference Information; Description; Theory Of Operation; Performance - Magnetrol STI Echotel 338 Installation And Operating Manual

Two-wire non-contact ultrasonic transmitter for level, volume, and open channel flow measurement
Hide thumbs Also See for STI Echotel 338:
Table of Contents

Advertisement

5 feet
10 feet
15 feet
20 feet
Beam Radius vs. Distance
35
2.0
2.1
2.2
2.3
r=2.6 inches
r=5.2 inches
r=7.9 inches
r
r=10.5 inches

Reference Information

Description

The Model 338 ultrasonic transmitter performs level,
volume, and open channel flow measurement of liquids.
Measurement based on non-contact ultrasonic technology
is especially suited for applications where no physical
contact can be made to the surface of the liquid material
to be measured. This is especially important in applica-
tions containing corrosive materials, suspended solids or
coating media.

Theory of Operation

Non-contact ultrasonic measurement is made by emitting
an ultrasonic pulse from the transducer and measuring the
time required for the echo to reflect from the liquid sur-
face and return to the transducer. The powerful electronics
measure the time of the round trip pulse and, by knowing
the speed of sound, calculates the distance. Since speed of
sound is temperature dependent, the transducer also meas-
ures the temperature in the vessel to provide compensation
for changing temperature.
By inputting the type and geometry of the vessel, the intel-
ligent electronics can calculate the liquid volume in the
vessel. In a similar operation, the Model 338 can perform
open channel flow measurement by converting the level
reading into units of volume per time. Common tank
shapes, flumes, and weirs are stored in the 338 software.
A 32-point linearization table is also available for unusual
tanks or primary flow elements.

Performance

Model 338 Transmitters are high performance units that
feature a powerful 80 kHz transducer, highly collimated
beam angles, and advanced digital signal processing. These
features allow the 338 to accurately track the liquid level
in difficult applications involving agitation and light foam.
The extremely narrow 5° beam angle, shown at left, allows
the 338 to be used in applications where other units with
wider beam angles fail due to false reflections.
51-638 Echotel Model 338 Two-Wire Ultrasonic Transmitter

Advertisement

Table of Contents
loading

Table of Contents