Battery Replacement; Maintenance; Specifications - Extech Instruments MO270 User Manual

Battery Replacement

If the instrument does not switch ON or displays low battery symbols, recharge the batteries as
detailed earlier in this guide. If the batteries require replacement, the unit must be returned for
service.

Maintenance


Always keep the instrument dry

To clean, wipe the analyzer with a damp cloth. Use a mild detergent if necessary but never use
abrasives or solvents.

Prevent dirt from accumulating at the electrode pins

Specifications

Display
Measurement resolution
Measurement accuracy
Measurement principle
Measurement ranges
Electrode pin length
Electrode pin type
Transmission frequency
Power supply
Low Battery Indication
Analyzer housing
Operating Temperature
Operating Humidity
Dimensions
Weight
All rights reserved including the right of reproduction in whole or in part in any form
Full color graphical display
0.1
Pin mode: ± (5% rdg + 5 digits)
Pinless mode is a relative reading only
Electrical resistance (pins)
Electromagnetic sensor (pinless)
0.0 to 99.9 Relative (pinless)
7.0 to 99.3 %WME (pins)
0.75" (22mm)
Integrated, replaceable
Analyzer/sensor communication frequency: 2.4GHz
Rechargeable Li-Polymer batteries (not user replaceable)
Battery symbols (for analyzer and sensor) displayed on LCD
Impact-proof plastic
o
32 to 122 F (0 to 50
80% Relative Humidity maximum
8 x 2.3 x 1.7" (203 x 58 x 43mm); not including remote probe
7.2 oz. (204g); not including remote probe
Copyright © 2012 FLIR Systems, Inc.
ISO-9001 Certified
www.extech.com
15
o
C)
MO270-EU-EN-v2.1 11/12