Battery Replacement - Extech Instruments HD755-NIST User Manual

Range Specifications
Range/Units (Max.)
± 0.034 bar
± 34.47 mbar
± 0.500 psi
± 0.035 Kg/cm
± 25.86 mm Hg
± 1.018 inches Hg
± 3.447 kPa
± 1.154 feet H
± 13.85 inches H
± 35.15 cm H
± 8.00 oz in
Warning: Pressure inputs of 10 psi or higher will damage the instrument. Do not
apply pressure higher than the maximum pressure listed in the specification table
Battery Replacement
When the low battery indicator BAT appears on the display or if the meter does not switch on
when the POWER button is pressed, it is necessary to replace the battery.
To replace the battery:
1. Open the battery compartment by sliding the meter's rear panel in the direction of the
embossed arrow.
2. Replace the 9V alkaline battery
3. Replace the battery compartment cover.
Never dispose of used batteries or rechargeable batteries in household waste.
As consumers, users are legally required to take used batteries to appropriate collection
sites, the retail store where the batteries were purchased, or wherever batteries are sold.
Disposal: Do not dispose of this instrument in household waste. The user is obligated to
take end‐of‐life devices to a designated collection point for the disposal of electrical and
electronic equipment.
Other Battery Safety Reminders

Never dispose of batteries in a fire. Batteries may explode or leak.

Never mix battery types. Always install new batteries of the same type.
2
O
2
O
2
O
2
2
7
Resolution
0.001
0.01
0.001
0.001
0.01
0.001
0.001
0.001
0.01
0.01
0.01
HD755-en-GB_V1.8 9/16