Moving The Printer - Xerox VersaLink C405 User Manual

Maintenance

Moving the Printer

WARNING:
• To lift the printer, always use at least two people to grasp the hand holds on each side of
the printer.
• To prevent you from dropping the printer or injury, lift the printer firmly by gripping the
recessed areas on both sides of the printer. Never lift the printer by gripping any other areas.
• If the optional 550-Sheet Feeder is installed, uninstall it before you move the printer. If the
optional 550-Sheet Feeder is not fixed to the printer securely, it can fall to the ground and
cause injury.
Follow these instructions when moving the printer:
1. Power off the printer, then disconnect the power cord and other cables from the back of the
printer.
WARNING: To prevent electric shock, never touch the power plug with wet hands. When
removing the power cord, ensure that you pull the plug and not the cord. Pulling the cord
can damage it, which can lead to fire or electric shock.
2. Remove any paper or other media from the output tray. If the output tray extension is extended,
close it.
184 Xerox ® VersaLink
User Guide
® C405 Color Multifunction Printer