Overview; Features - Cisco Firepower 1600 Hardware Installation Manual

Overview

•
•
•
•
•
•
•
•
•
•
•

Features

The Cisco Firepower Management Center (FMC) 1600, 2600, and 4600 management appliances run software
that provides extensive intelligence about the users, applications, devices, threats, and vulnerabilities that exist
in your network. It also uses this information to analyze your network's vulnerabilities. It then provides tailored
recommendations on what security policies to put in place and what security events you should investigate.
See Product ID Numbers, on page 14
the FMC 1600, 2600, and 4600. You can remove and replace drives and power supplies. For all other internal
component failures, you must send your chassis for RMA.
The FMC management appliances support Cisco Firepower Threat Defense software. See the
Compatibility
system and hosting environment requirements, for each supported Firepower version.
Note The FMC 1600, 2600, and 4600 are certified for Federal Information Processing Standards (FIPS) 140-2
beginning in Cisco Firepower version 6.4.1. See the "Security Certifications Compliance" topic in the
"Appliance Platform Settings" chapter in the
instructions on how to enable security certifications compliance.
The following table lists the features of the FMC 1600, 2600, and 4600.
Features, on page 1
Package Contents, on page 3
Serial Number Locations, on page 4
Front Panel, on page 5
Front Panel LEDs, on page 7
Rear Panel, on page 10
Rear Panel LEDs, on page 11
Power Supply, on page 12
Hardware Specifications, on page 13
Product ID Numbers, on page 14
Power Cord Specifications, on page 14
Guide, which provides Cisco Firepower software and hardware compatibility, including operating
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
C H A P T E R
for a list of the field-replaceable product IDs (PIDs) associated with
Firepower Management Center Configuration Guide
1
Cisco Firepower
for the
1