Product Id Numbers; Power Cord Specifications - Cisco Firepower 1600 Hardware Installation Manual

Product ID Numbers

Specification
Sound power level
Sound pressure level
Product ID Numbers
The following table lists the field-replaceable PIDs associated with the FMC 1600, 2600, and 4600. The spare
components are ones that you can order and replace yourself. If any internal components fail, you must RMA
the entire chassis including the SFPs and SFP cables. Remove the drives and power supplies before you send
the chassis for RMA.
Table 4: FMC 1600, 2600, and 4600 PIDs
PID
FMC-M5-PS-AC-770W
FMC-M5-PS-AC-770W=
FMC-M5-HDD-1.2TB
FMC-M5-HDD-1.2TB=
FMC-M5-HDD-600G
FMC-M5-HDD-600G=
UCSC-RAILB-M4

Power Cord Specifications

Each power supply has a separate power cord. Standard power cords or jumper power cords are available for
connection to the FMC 1600, 2600, and 4600. The jumper power cords for use in racks are available as an
optional alternative to the standard power cords.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Note Only the approved power cords and jumper cords provided with the FMC 1600, 2600, and 4600 are supported.
The following power cords and jumper cords are supported.
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
14
1600 2600
5.8 Bels (measure A-weighted per ISO7779 LWAd)
Operation at 73°F (23°C)
43 dBa (measure A-weighted per ISO7779 LpAM)
Operation at 73°F (23°C)
Description
AC power supply
AC power supply (spare)
FMC 1600 and 4600 1.2-TB hard disk drive
FMC 1600 and 4600 1.2-TB hard disk drive (spare)
FMC 2600 600-GB hard disk drive
FMC 2600 600-GB hard disk drive (spare)
Rail kit
Overview
4600