Power Supply - Cisco Firepower 1600 Hardware Installation Manual

Power Supply

3
5
Power Supply
The following table lists the specifications for each 770-W AC power supply used in the FMC 1600, 2600,
and 4600.
Table 2: Power Supply Specifications
Description
Power consumption
AC input voltage range
AC input frequency
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
12
1-Gbps Ethernet dedicated
management link:
• Off—Link speed is 10 Mbps.
• Amber—Link speed is 100 Gbps.
• Green—Link speed is 1 Gbps.
Rear unit identification:
• Off—The unit identification
function is not in use.
• Blue, flashing—The unit
identification function is
activated.
4 1-Gbps Ethernet dedicated
management link:
• Off—No link is present.
• Amber—Link is active.
• Green, flashing—Traffic is
present on the active link.
Power supply (one LED for each
6
power supply):
• Off—No AC input (12-V main
power off; 12-V standby power
off)
• Green, flashing—12-V main
power off; 12-V standby power
on.
• Green—12-V main power on;
12-V standby power on.
• Amber, flashing—Warning
threshold detected but 12-V main
power on.
• Amber—Critical error detected;
12-V main power off ( for
example, overcurrent,
overvoltage, or overtemperature
failure).
Specification
1313 BTU/hr
Nominal range: 100 to 120 V AC, 200 to 240 V AC
Range: 90–132 V AC, 180–264 V AC
Nominal range: 50–60 Hz
Range: 47–63 Hz
Overview