186
6-2. Panoramic view monitor
Things you should know
If you notice any symptoms
If you notice any of the following symptoms, refer to the likely cause and the
solution, and re-check.
If the symptom is not resolved by the solution, have the vehicle inspected
by any Toyota retailer or Toyota authorized repairer, or any reliable repairer.
Symptom
The image is difficult to see
The image is blurry
The image is out of align-
ment
Likely cause
The vehicle is in a dark
area
The temperature around
the lens is either high or
low
The outside tempera-
ture is low
There are water drop-
lets on the camera
It is raining or humid
Foreign matter (mud
etc.) is adhering to the
camera
Sunlight or headlights
are shining directly into
the camera
The vehicle is under flu-
orescent lights, sodium
lights, mercury lights etc.
Dirt or foreign matter (such
as water droplets, snow,
mud etc.) is adhering to
the camera.
The camera or surround-
ing area has received a
strong impact.
Solution
Back up while visually
checking the vehicle's sur-
roundings. (Use the moni-
tor again once conditions
have been improved.) The
procedure for adjusting the
picture quality of the pan-
oramic view monitor sys-
tem is the same as the
procedure for adjusting the
screen. (P.31)
Flush the camera with a
large quantity of water and
wipe the camera lens
clean with a soft and wet
cloth.
Have the vehicle inspected
by any authorized Toyota
retailer or Toyota autho-
rized repairer, or any reli-
able repairer.