Toyota Prius PHV 2019 Owner's Manual page 203

7-1. Phone operation (Hands-free system for cellular phones)
4
Check that the message is dis-
played.
"Re-send": Select to re-send the mes-
sage. This switch is displayed if send-
ing the text message has failed.
Create a new message
The message type which can be
created is SMS only.
1
Display the phone top screen.
(P.190)
From the contact or favourite

screen
2
Select "Contacts" or "Favourite".
3
Select desired contact.
From the call history screen

2
Select "History".
3
Select a contact not yet regis-
tered in the contact list.
4
Select corresponding to the
desired number.
5
Select "New".
6
Enter the message and then
select "OK".
7
Select "Send".
"Cancel": Select to cancel sending the
message.
 While the message is being sent,
a sending message screen is
displayed.
8
Check that a confirmation
screen is displayed when the
operation is complete.
 If an error message is displayed,
follow the guidance on the
screen to try again.
●
The short messages can contain up to
160 characters. The divided text will
be sent when the message body
exceed over 160 characters.
●
Depending on the type of Bluetooth
phone used for receiving messages,
reply function may not be used.
Replying to a message
(quick reply)
15 messages have already been
stored.
1
Display the message screen.
(P.201)
2
Select a desired account name
that is displayed on the left side
of screen.
3
Select the desired message
from the list.
4
Select "Reply".
5
Select "Quick message".
6
Select the desired message.
: Select to edit the message.
(P.204)
7
Select "Send".
"Cancel": Select to cancel sending the
message.
 While the message is being sent,
203
®
7