Toyota Prius PHV 2019 Owner's Manual page 200

200
7-1. Phone operation (Hands-free system for cellular phones)
●
When the "p" pause tone is used, the
tone data up until the next pause tone
will be automatically sent after 2 sec-
onds have elapsed. When the "w"
pause tone is used, the tone data up
until the next pause tone will be auto-
matically sent after a user operation is
performed.
●
Release tones can be used when
automated operation of a phone
based service such as an answering
machine or bank phone service is
desired. A phone number with contin-
uous tone signals can be registered in
the contact list.
Transmit volume setting
1
Select "Transmit volume".
2
Select the desired level for the
transmit volume.
3
Press the
previous screen.
●
The sound quality of the voice heard
from the other party's speaker may be
negatively impacted.
●
"Transmit volume" is dimmed when
mute is on.
Switching calls while a call
is in progress
 When there are no calls on hold
during a call: "Hold" is displayed.
When selected, the current call is
placed on hold.
 When there is no current call, but
there is a call on hold: "Activate"
is displayed. When selected, the
system switches to the call that
was on hold.
 When there is another call on
●
When a call is interrupted by a third
party while talking, the incoming
call screen is displayed.
1
To refuse to receive the call: Select
button to display
"Decline" or press the
steering wheel.
■
1
 Each time "Swap calls" is
●
hold during a call: "Swap calls" is
displayed. When selected, the
current call is placed on hold,
and the system switches to the
call that was on hold.
This function may not be available
depending on the type of cellular
phone.
Incoming call waiting
Select "Answer" or press the
switch on the steering wheel to
start talking with the other party.
Changing parties
Select "Swap calls".
selected during an interrupted
call, the party who is on hold will
be switched.
This function may not be available
depending on the type of cellular
phone.
switch on the