204
7-1. Phone operation (Hands-free system for cellular phones)
a sending message screen is
displayed.
8
Check that a confirmation
screen is displayed when the
operation is complete.
If an error message is displayed,
follow the guidance on the
screen to try again.
●
Depending on the type of Bluetooth
phone, reply function is not available.
■
Editing quick reply messages
This operation cannot be performed
while driving.
1
Select "Reply".
2
Select "Quick message".
3
Select
corresponding to the
desired message to edit.
4
Select "OK" when editing is
completed.
●
To reset the edit quick reply mes-
sages, select "Default".
●
Quick message 1 ("I am driving and
will arrive in approximately [##] min-
utes."):
This message cannot be edited and
will automatically fill in [##] with the
navigation calculated estimated time
of arrival on the confirm message
screen.
If there are waypoints set, [##] to the
next waypoint will be shown.
If there is no route currently set in the
navigation system, quick message 1
cannot be selected.
Calling the message sender
Calls can be made to an e-
mail/SMS/MMS message sender's
phone number.
This operation can be performed
while driving.
■
Calling from e-mail/SMS/MMS
message display
1
Display the message screen.
(P.201)
2
Select a desired account name
®
that is displayed on the left side
of screen.
3
Select the desired message.
4
Select
, or press the
switch on the steering wheel.
If there are 2 or more phone
numbers, select the desired
number.
5
Check that the dialing screen is
displayed.
■
Calling from a number within a
message
Calls can be made to a number
identified in a message's text area.
This operation cannot be performed
while driving.
1
Display the message screen.
(P.201)
2
Select a desired account name
that is displayed on the left side
of screen.
3
Select the desired message.