180
6-2. Panoramic view monitor
Area of the image captured by
the camera
Wide front view
Side views
Rear view
A
The area around both corners of
the bumper will not be dis-
played.
●
Black masking is done for distance
detection differences to the front of
the vehicle.
●
The area covered by the camera is
limited. Objects which are close to
either corner of the bumper or under
the bumper cannot be seen on the
screen.
●
The area displayed on the screen may
vary depending on vehicle orientation
or road conditions.
●
The camera uses a special lens. The
distance in the image displayed on the
screen will differ from the actual dis-
tance.
The camera
The cameras for the panoramic
view monitor are located as shown