3
Check that the following screen
is displayed when the device is
found.
If the device has been connected
to the system before, this screen
may not be displayed and the
Miracast™ connection may start
immediately.
4
Select the system name on the
smartphone.
5
Select "Yes".
6
Check that Miracast™ operation
screen is displayed.
Depending on the device con-
nected, it may take approxi-
mately 5 to 15 seconds before
the Miracast™ operation screen
is displayed.
●
The signal strength/status of the
®
Wi-Fi
connection (P2P mode) is dis-
played on the upper right side of the
screen. (P.15)
4-3. Media operation
●
To check the Miracast™ setting on the
®
Wi-Fi
setting screen (P.45)
●
Miracast™ and MirrorLink™ will not
be available at the same time using
®
Wi-Fi
connection (P2P mode).
127
4