Toyota Prius PHV 2019 Owner's Manual page 39

is not on the list, select "Add new
device" to register the device.
(P.40)
4
Select the desired connection.
"Device info": Select to confirm and
®
change the Bluetooth
mation. (P.41)
When another Bluetooth

is connected
 To disconnect the Bluetooth
device, select "Yes".
5
Check that a confirmation
screen is displayed when the
connection is complete.
 If an error message is displayed,
follow the guidance on the
screen to try again.
●
It may take time if the device connec-
tion is carried out during Bluetooth
audio playback.
●
Depending on the type of Bluetooth
device being connected, it may be
necessary to perform additional steps
on the device.
●
When disconnecting a Bluetooth
device, it is recommended to discon-
nect using this system.
2-2. Connectivity settings
Connecting a Bluetooth
device in a different way
(from phone top screen)
P.192
Connecting a Bluetooth
device in a different way
(from phone setup screen)
P.206
Connecting a Bluetooth
device in a different way
device infor-
(from Bluetooth
screen)
®
device
P.121
®
■ Auto connection mode
To turn auto connection mode on,
set "Bluetooth power" to on.
(P.42) Leave the Bluetooth
device in a location where the con-
nection can be established.
 When the power switch is turned
to ACCESSORY or ON mode,
the system searches for a
nearby registered device.
®
 The system will connect with the
registered device that was last
®
connected, if it is nearby. When
automatic connection priority is
set to on and there is more than
®
one registered Bluetooth
available, the system will auto-
matically connect to the
Bluetooth
est priority. (P.43)
®
®
®
®
audio
®
®
phone
®
phone with the high-
39
2