Krups PRECISION KM500510 Manual page 19

IFU_KR_COFFEE_MAKER_DAHLSTROM_MECA_Mise en page 1 23/11/10 09:03 Page21
MAKING COFFEE
See drawing N° 5 to 13.
n Open the top lid by pressing the open button (b) and fill the water tank
with cold water taking careful note of the number of cups. Use filtered
water if possible.
The water level indicator displays the number of cups by turning from light
to dark as the water level rises.
n Insert the jug or thermal pot (f) after prewarming by rinsing it out with
hot water (prewarming the jug will help keeping coffee hotter) securely
in place (e). Be sure the jug sits straight and level on the heating
plate/base (e) before starting the brew cycle.
n Place a paper or permanent filter in the filter holder basket (depending
on the model).
Krups original accessories (according to model):
- #4 paper filters 100-pack. Item #983
- #4 size gold tone filter. Item #049
n Add the ground coffee in the filter or permanent filter (depending on the
model).
n Measure one rounded coffee scoop per (140 ml) cup of water.
Note : Pay attention to max level indicated on the permanent filter.
n This simple step is critical to the taste of your brewed coffee.
n See your brewing guide on page 25 for more detail.
n Close the lid. The machine is ready to brew.
n For immediate brewing, press the ON/OFF button and the brew cycle
will begin.
n The ON/OFF button will glow red while the machine is brewing and stay
lit for 2 hours while the coffee is kept warm on the heating plate.
n You can turn the machine off at any time by pressing the ON/OFF
button again.
DURING THE BREW CYCLE STEAM RISES FROM THE
TOP OF THE MACHINE. BE CAREFUL TO KEEP HANDS
AWAY FROM THIS AREA UNTIL AFTER THE BREW
CYCLE IS COMPLETED !
English
21