Checking The Headlight Setting - KTM 690 Enduro R 2019 Owner's Manual

14 ELECTRICAL SYSTEM
14.11
192

Checking the headlight setting

400726-10
–
Position the vehicle upright on a horizontal surface in front of
a light wall and make a marking at the height of the center of
the low beam headlight.
–
Make another mark at a distance
Guideline
B
Distance
–
Position the vehicle vertically at a distance
wall.
Guideline
A
Distance
–
The rider now mounts the motorcycle with luggage and passen-
ger if applicable.
–
Switch on the low beam.
–
Check the headlight setting.
The light-dark boundary must be exactly on the lower mark-
ing when the motorcycle is ready to be operated with the
rider mounted along with any luggage and a passenger if
applicable.
» If the boundary between light and dark does not meet
specifications:
–
Adjust headlight range. (
B
under the first marking.
5 cm (2 in)
A
away from the
5 m (16 ft)
p. 193)